Title Page
-
Project Name - Room Name
-
Project Number
-
Project Bluebeam
-
Conducted on
-
Prepared by
-
Location
System Commissioning - Step 2: Software Load & Test
-
Is there a Control System present. Crestron/AMX/BIAMP/QSC
-
Did the programmer provide a release?
-
Provide release version.
-
Was the User Guide included in the release?
-
Please attached the provided User Guide.
-
Is the Control System firmware current?
-
Please update firmware.
-
Please load any related software or programs to the equipment to be commissioned.
-
Are all IP Table devices online excluding the XPanel?
-
Troubleshoot Offline devices. List any devices that cannot be brought online and why. Notify programmer where applicable.
-
Does this system match an established template. i.e. AVI-SPL template Connect/TrueTiles or Customer Template....
-
Please familiarize yourself with the User Guide for this project before proceeding.
-
If there is not a User Guide provided for this project please reference a system utilizing this template.
-
Follow the instructions of the User Guide to begin testing.
-
Begin with basic GUI functionality, does the user interface function as expected for Startup/Page Flip/System Shutdown
-
Please note the fail points and add to the punchlist for the programmer.
-
Video/Audio Routing Testing - Presentation
-
Does selecting a source reflect feedback that source has been selected.
-
If this system formatted to route the selected source upon selection? Did this source video & audio route properly?
-
Please please detail the failure and add to programming punchlist.
-
If this system is formatted for multi-destination routing via a Video Widget or Pick n Poke programming... Did the routing perform as expected?
-
Please please detail the failure and add to programming punchlist.
-
Is the audio and video quality of the signal route correct?
-
Please please detail the failure and add to programming punchlist.
-
Are the audio controls related to your presentation source functioning as expected? ie Volume Control.
-
Please please detail the failure and add to punchlist.
-
Does the system have a Conference Device VTC/VoIP/Teams/Zoom....
-
Begin with basic functionality testing, does the navigation through the various conferencing pages function properly.
-
Please note the fail point and add to the punchlist for the programmer.
-
Move on to more detailed testing... Dialing/One Touch Join/Call/End.... Do these functions work as expected?
-
Please please detail the failure and add to programming punchlist.
-
Does this system have a Camera
-
Does the camera function as expected? Pan/Tilt/Zoom/Presets...
-
Please please detail the failure and add to programming punchlist.
-
Does this system have content share functionality?
-
Does the content share signal route as expected?
-
Please please detail the failure and add to programming punchlist.
-
Are the audio controls related to the conferencing system functioning as expected? ie Privacy/Volume.
-
Please please detail the failure and add to programming punchlist.
-
Does this system have additional room control functions? Display/Lighting/Shades/Audio Control
-
Display Controls
-
Power Functions. Power On/Off
-
Screen Functions. Screen Raise/Lower
-
Lighting Control
-
Test functions provided by lighting vendor. ie On/Off/Presets.
-
Please please detail the failure and add to programming punchlist.
-
Shade Control
-
Test functions of the Shades. ie Up/Down/Stop/Presets...
-
Please please detail the failure and add to programming punchlist.
-
Audio Control
-
Volume Raise/Lower/Mute
-
Microphone Gain Raise/Lower/Mute
-
Please take photos of the final rack build.
-
This concludes system review. Please list any additional notes.
