Information
-
Site Address
-
Job No.
-
Conducted on
-
Prepared by
Kitchen Inspection
-
Kitchen 1
1.00 Kitchen 1
-
1.01 Have all cupboards been installed level and parallel with walls and cabinets?
-
1.02 Have all doors / draws been adjusted for equal / even gaps? (check operation)
-
1.03 Have all fillers been installed correctly?
-
1.04 Finished fronts are neat, joins cleaned and overhand gables?
-
1.05 Have kickboards been fitted correctly? (i.e do not flex)
-
1.06 Benchtop joins are neat / clean and to Australian standards?
-
1.07 Have the headers / scotia been fitted correctly?
-
1.08 Has the sink been sealed off or left on site for install by other trade?
-
1.09 The sink is free of scratches and damage?
-
1.10 Have all adjustable shelves been installed?
-
1.11 Are all handles installed neat and level
-
1.12 Are all screws capped?
-
1.13 Are all benchtops and joinery neatly sealed off to walls or adjacent panels?
-
1.14 Is the cutout for the cooktop correct, neat and sealed?
-
1.15 Are oven fascias installed and oven bearers glued down?
-
1.16 Is the dishwasher fascia / full top installed?
-
1.17 Are holes drilled for the dishwasher cable and pipes, with cable outlets glued in place?
-
1.18 Have all accessories and the cutlery tray been installed? (strip lighting)
-
1.19 Has all hardware been fitted correctly? (gallery rails)
-
1.20 Have the cupboards been cleaned of labels, excess glue, sawdust and marks?
-
1.21 Has all waste been placed in designated area?
-
1.22 Has the work area been swept?
-
1.23 Photos taken of any uninstalled joinery or defects.
-
Kitchen 2
2.00 Kitchen 2
-
2.01 Have all cupboards been installed level and parallel with walls and cabinets?
-
2.02 Have all doors / draws been adjusted for equal / even gaps? (check operation)
-
2.03 Have all fillers been installed correctly?
-
2.04 Finished fronts are neat, joins cleaned and overhand gables?
-
2.05 Have kickboards been fitted correctly? (i.e do not flex)
-
2.06 Benchtop joins are neat / clean and to Australian standards?
-
2.07 Have the headers / scotia been fitted correctly?
-
2.08 Has the sink been sealed off or left on site for install by other trade?
-
2.09 Is the sink scratched or damaged?
-
2.10 Have all adjustable shelves been installed?
-
2.11 Are all handles installed neat and level
-
2.12 Are all screws capped?
-
2.13 Are all benchtops and joinery neatly sealed off to walls or adjacent panels?
-
2.14 Is the cutout for the cooktop correct, neat and sealed?
-
2.15 Are oven fascias installed and oven bearers glued down?
-
2.16 Is the dishwasher fascia / full top installed?
-
2.17 Are holes drilled for the dishwasher cable and pipes, with cable outlets glued in place?
-
2.18 Have all accessories and the cutlery tray been installed? (strip lighting)
-
2.19 Has all hardware been fitted correctly? (gallery rails)
-
2.20 Have the cupboards been cleaned of labels, excess glue, sawdust and marks?
-
2.21 Has all waste been placed in designated area?
-
2.22 Has the work area been swept?
-
2.23 Photos taken of any uninstalled joinery or defects.
-
3.0 Bathroom / Ensuite 1
3.0 Bathroom / Ensuite 1
-
3.01 Have all cupboards been installed level and parallel with walls and cabinets?
-
3.02 Have all doors / draws been adjusted for equal / even gaps? (check operation)
-
3.03 Have all fillers been installed correctly?
-
3.04 Have kickboards been fitted correctly? (i.e do not flex)
-
3.05 Benchtop joins are neat / clean and to Australian standards?
-
3.06 Have the headers / scotia been fitted correctly?
-
3.07 Have the basins been sealed off or left on site for install by other trade?
-
3.08 Are the basins scratched or damaged?
-
3.09 Have all adjustable shelves been installed?
-
3.10 Are all handles installed neat and level
-
3.11 Are all screws capped?
-
3.12 Are all benchtops and joinery neatly sealed off to walls or adjacent panels?
-
3.13 Has all hardware been fitted correctly? (gallery rails)
-
3.14 Have the cupboards been cleaned of labels, excess glue, sawdust and marks?
-
3.15 Has all waste been placed in designated area?
-
3.16 Has the work area been swept?
-
3.17 Photos taken of any uninstalled joinery or defects.
-
4.0 Bathroom / Ensuite 2
4.0 Bathroom / Ensuite 2
-
4.01 Have all cupboards been installed level and parallel with walls and cabinets?
-
4.02 Have all doors / draws been adjusted for equal / even gaps? (check operation)
-
4.03 Have all fillers been installed correctly?
-
4.04 Have kickboards been fitted correctly? (i.e do not flex)
-
4.05 Benchtop joins are neat / clean and to Australian standards?
-
4.06 Have the headers / scotia been fitted correctly?
-
4.07 Have the basins been sealed off or left on site for install by other trade?
-
4.08 Are the basins scratched or damaged?
-
4.09 Have all adjustable shelves been installed?
-
4.10 Are all handles installed neat and level
-
4.11 Are all screws capped?
-
4.12 Are all benchtops and joinery neatly sealed off to walls or adjacent panels?
-
4.13 Has all hardware been fitted correctly? (gallery rails)
-
4.14 Have the cupboards been cleaned of labels, excess glue, sawdust and marks?
-
4.15 Has all waste been placed in designated area?
-
4.16 Has the work area been swept?
-
4.17 Photos taken of any uninstalled joinery or defects.
-
5.0 Bathroom / Ensuite 3
5.0 Bathroom / Ensuite 3
-
5.01 Have all cupboards been installed level and parallel with walls and cabinets?
-
5.02 Have all doors / draws been adjusted for equal / even gaps? (check operation)
-
5.03 Have all fillers been installed correctly?
-
5.04 Have kickboards been fitted correctly? (i.e do not flex)
-
5.05 Benchtop joins are neat / clean and to Australian standards?
-
5.06 Have the headers / scotia been fitted correctly?
-
5.07 Have the basins been sealed off or left on site for install by other trade?
-
5.08 Are the basins scratched or damaged?
-
5.09 Have all adjustable shelves been installed?
-
5.10 Are all handles installed neat and level
-
5.11 Are all screws capped?
-
5.12 Are all benchtops and joinery neatly sealed off to walls or adjacent panels?
-
5.13 Has all hardware been fitted correctly? (gallery rails)
-
5.14 Have the cupboards been cleaned of labels, excess glue, sawdust and marks?
-
5.15 Has all waste been placed in designated area?
-
5.16 Has the work area been swept?
-
5.17 Photos taken of any uninstalled joinery or defects.
-
6.0 Bathroom / Ensuite 4
6.0 Bathroom / Ensuite 4
-
6.01 Have all cupboards been installed level and parallel with walls and cabinets?
-
6.02 Have all doors / draws been adjusted for equal / even gaps? (check operation)
-
6.03 Have all fillers been installed correctly?
-
6.04 Have kickboards been fitted correctly? (i.e do not flex)
-
6.05 Benchtop joins are neat / clean and to Australian standards?
-
6.06 Have the headers / scotia been fitted correctly?
-
6.07 Have the basins been sealed off or left on site for install by other trade?
-
6.08 Are the basins scratched or damaged?
-
6.09 Have all adjustable shelves been installed?
-
6.10 Are all handles installed neat and level
-
6.11 Are all screws capped?
-
6.12 Are all benchtops and joinery neatly sealed off to walls or adjacent panels?
-
6.13 Has all hardware been fitted correctly? (gallery rails)
-
6.14 Have the cupboards been cleaned of labels, excess glue, sawdust and marks?
-
6.15 Has all waste been placed in designated area?
-
6.16 Has the work area been swept?
-
6.17 Photos taken of any uninstalled joinery or defects.
-
7.0 Laundry 1
7.0 Laundry 1
-
7.01 Have all cupboards been installed level and parallel with walls and cabinets?
-
7.02 Have all doors / draws been adjusted for equal / even gaps? (check operation)
-
7.03 Have all fillers been installed correctly?
-
7.04 Have kickboards been fitted correctly? (i.e do not flex)
-
7.05 Benchtop joins are neat / clean and to Australian standards?
-
7.06 Have the headers / scotia been fitted correctly?
-
7.07 Has the tub been sealed off or left on site for install by other trade?
-
7.08 Is the tub scratched or damaged?
-
7.09 Have all adjustable shelves been installed?
-
7.10 Are all handles installed neat and level
-
7.11 Are all screws capped?
-
7.12 Are all benchtops and joinery neatly sealed off to walls or adjacent panels?
-
7.13 Has all hardware been fitted correctly? (gallery rails)
-
7.14 Have the cupboards been cleaned of labels, excess glue, sawdust and marks?
-
7.15 Has all waste been placed in designated area?
-
7.16 Has the work area been swept?
-
7.17 Photos taken of any uninstalled joinery or defects.
-
8.0 Laundry 2
8.0 Laundry 2
-
8.01 Have all cupboards been installed level and parallel with walls and cabinets?
-
8.02 Have all doors / draws been adjusted for equal / even gaps? (check operation)
-
8.03 Have all fillers been installed correctly?
-
8.04 Have kickboards been fitted correctly? (i.e do not flex)
-
8.05 Benchtop joins are neat / clean and to Australian standards?
-
8.06 Have the headers / scotia been fitted correctly?
-
8.07 Has the tub been sealed off or left on site for install by other trade?
-
8.08 Is the tub scratched or damaged?
-
8.09 Have all adjustable shelves been installed?
-
8.10 Are all handles installed neat and level
-
8.11 Are all screws capped?
-
8.12 Are all benchtops and joinery neatly sealed off to walls or adjacent panels?
-
8.13 Has all hardware been fitted correctly? (gallery rails)
-
8.14 Have the cupboards been cleaned of labels, excess glue, sawdust and marks?
-
8.15 Has all waste been placed in designated area?
-
8.16 Has the work area been swept?
-
8.17 Photos taken of any uninstalled joinery or defects.
9.00 Internal Use Only
-
9.01 Can bench tops be installed? If yes contact lnstaller to book check measure
-
9.02 Can all work be paid?
-
Comments
-
Site Manager Signature