Title Page
-
During production inspection (on buyer’s special request)
-
Date of Inspection
-
Supplier : Bolero Çorap İplik ve Tekstil Sanayi Ticaret Limited Şirketi
-
Manufacturer: Bolero Çorap İplik ve Tekstil Sanayi Ticaret Limited Şirketi
-
Buyer
-
Order Number
-
Product Description
-
Sample approved by
-
Inspection location
Inspection Result
-
Item SKU.
-
PO Qty
-
Inspection Qty (according to AQL level II)
-
No. of Cartons
-
Inspection result
Audit Content
-
1. Warehouse photos (Photos of piled cartons in your warehouse)
-
2. Photos of master-carton
-
Measurements of carton
-
Carton weight
-
Master carton barcode scanning (please scan actual label not photo of it or printed draft)
-
Interior of master carton – it must be visible if the carton is fully packed and there is no empty space in it and photos of each layer of products
-
Thickness and structure of cardboard
-
General photo and photo of unpacked products
-
Polybag/inner box barcode and warning
-
Silica gel sachets (Photo of silica gel sachets is required only in case product requires it: wood, bamboo, grass, coconut fiber, water hyacinth and so on)
-
General photos of each side
-
Assembly/folding way (for sets packing in gift box)
-
Product measurements (for sets measurements of gift box and each item in set)6
-
Add drawing
-
Product barcode scanning (please scan actual label not photo of it or printed draft)
-
Accepted PP sample and sample from mass compared
-
5. Function check and other required photos (type of required photos depends from type of product)
-
Function check (if product has function)
-
1. Defects rate (Please put in table qty of found defects and short description. Accepted defects rate is as for standard inspection: critical – 0 , major – 2,5 and minor – 4. If defects rate is above that inspection is failed)
-
Add drawing
