Title Page
-
Site conducted
-
Conducted on
-
Location
-
Prepared by
-
Hour meter reading
Daily inspection
-
Is truck available for use?
-
Is there any new damage to the machine?
Pre-operation / visual inspections
-
Perform these inspections prior to starting the machine.
-
Are there any visible leaks?
-
Is the coolant system leak free?
-
Is the fuel system leak free?
-
Is the engine leak free?
-
Is the brake system leak free?
-
Is the differential leak free?
-
Is the transmission leak free?
-
Is the hydraulic system leak free?
-
Is the steering system leak free?
-
Check Engine oil, Coolant level and Brake fluid level.
-
Are all fluids between the low and high level?
-
Is the Engine oil full?
-
Is the coolant reservoir full?
-
Is the hydraulic reservoir full?
-
Is the brake fluid reservoir full?
-
Paint condition:
-
Seat condition:
-
Drive tire condition:
-
Steer tire condition:
-
Do all wheel bolts appear to be torqued properly?
-
Are the battery terminal connections clean & secure?
-
Are the lift chains properly tensioned, with no signs of stretching?
-
Are the forks straight, free from damage, cracks and deformation?
Operation inspections:
-
Start machine and check for any abnormal noises / vibrations.
-
Does the machine start & run properly?
-
Does the machine function without any abnormal noise / vibration?
-
Does the machine idle and accelerate properly?
-
Is the exhaust gas color and amount usual?
-
Does the brake pedal move freely and feel firm when applied?
-
Does the brake pedal remain off the floor when fully applied?
-
Does the inching pedal function properly?
-
Does the parking brake handle move freely and feel firm when applied?
-
Does the steering wheel move freely, without excessive play?
-
Inspect the seat belt, horn, strobe light, backup alarm, blue reverse light and work lights for proper function.
-
Are all safety items functional and in good condition?
-
Does the horn operate properly?
-
Does the strobe light operate properly?
-
Does the backup alarm operate properly?
-
Does the blue reverse light operate properly?
-
Do the worklights function properly?
-
Is the seatbelt functional, free of cuts/fraying?
-
Do the gauges all operate properly?
-
Do all other lights operate properly?