Anonymous

750-FRM-0188 X-Ray Quality Control Check Control Point (CP)

Use this Template

Print as PDF

Use this Template

Information

Document No.
Audit Title
Client / Site
Conducted on
Prepared by
Location
Personnel

Sig 1

Complete the following for each X-ray check.
Product Number
Time
Type of Check?
3 Consecutive Detections Performed?
Metal samples detected?
- 1.5mm Ferrous
- 1.5mm Non-Ferrous
- 2.0mm Stainless Steel
Smallest Standard Value Ceramic size detected?
- 8.0mm
- 6.0mm
- 5.0mm
- 4.0mm
- 3.0mm
- 2.0mm
Smallest Standard Value Glass size detected?
- 7.0mm
- 6.0mm
- 5.0mm
- 4.0mm
- 3.0mm
- 2.0mm
Metal samples detected?
- 1.5mm Ferrous
- 1.5mm Non-Ferrous
- 2.0mm Stainless Steel
All samples ejection conform?
Number of Units Scanned?
Number of Units Rejected?
Number of False Rejects?
Number of True Rejects?
Number of Total Rejects?
Comments and Corrective Actions

Anonymous

750-FRM-0188 X-Ray Quality Control Check Control Point (CP)

Use this Template

Print as PDF

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.