Information
-
Monthly Shop Inspection
-
Terminal
-
Date of inspection
-
Inspected By:
Housekeeping
-
Is the work area and fuel area clean and orderly?
Floors and Isles
-
Are floors dry, free of debris and tripping hazards?
Stairways
-
Are stairs in good condition, with handrails, and adequately lighted?
Ladders
-
Are ladders in good physical condition?
Storage areas
-
Are materials, vehicles, equipment and supplies properly stored without blocking fire extinguishers or exits and are these areas free from leaks and spills?
Machines and equipment
-
Are machines and equipment such as forklifts, pallet jacks, hand trucks, hand tools, office equipment , vending machines, roll up doors, etc in safe operating condition?
Hand tools
-
Are tools and cords in good condition?
Welder/Torch
-
Are welding machines and cylinders in good condition?
-
Are gauges and and hoses in good repair?
-
Are cylinders secured in place?
Grinder Wheel
-
Are all safety guards in place?
-
Is work rest no more than 1/8" from wheel?
-
Is the tongue guard in place and no more than 1/4" from the top of the grinder wheel?
-
Is grinder wheel free from excessive wear or cracks and replaced as needed?
Lighting
-
Is lighting in all areas working?
-
Is the wiring for all lights in good condition?
Fire Extinguishers
-
Are the fire extinguishers easily accessible(not blocked by trash cans etc.)
-
Have fire extinguishers been checked this month?
First Aid
-
Are first aid kits checked monthly using the first aid monthly sheet and properly stocked?
Entrance/Exits
-
Are they kept dry or provided with nonskid mats?
-
Are emergency exits unlocked, marked, kept clear and easily accessible?
-
Are lighted exit signs and emergency lighting operable?
Training
-
Are all employees trained in proper lifting techniques and material handling?
-
Are only properly trained employees operating and repairing equipment?
-
Have all employees received training in ladder and battery safety, lockout/tagout and tire safety?
-
If a scissor lift is on the premises, have employees received safety training for lift?
Signs
-
Are safety instructions and waring signs posted where needed?
Entering/Exiting Vehicles
-
Do shop employees use the three point hold properly when getting on and off tractors, trailers, hostlers and forklifts?
Personal Protective Equipment
-
Are safety glasses/eye protection worn by shop employees when required?
-
Is hearing protection worn when operating or working around loud equipent?
-
Are gloves and faceshield worn when changing propane tanks?
-
Are seat belts worn while operating forkllifts or tractors?
-
Is loose clothing forbidden around moving parts?
Emergency Action Plan
-
Is the emergency action plan and map current, available and known by all?
Right to Know
-
Is "right to know" (haz com) basic info posted for all to see?
Fuel Area
-
Is fuel area dry and free of leaks and spills?
Eye Wash Station
-
Is eye wash station clean, tested, and flushed weekly and is inspection documented?
Lockout/Tagout
-
Are lockout/tagout procedures followed at all times?
Electrical
-
Is there 36" of clearance in front of the electrical panels?
Trucks/Trailers
-
Are Trucks/Trailers clan inside and out, free of dents, dings, leaks and are tires, catwalks, air hoses, etc. in good condition?
Hydraulic Forklift Ramp
-
Are the hydraulic cylinders secure, free of leaks and damage?
-
Are safety stands being used, secured, and operating properly?
-
Is the battery in the tray and secured and operating properly?
-
Is the battery tray top secure and are battery wires operating well?
-
Are the wire ends secure and in good operating condition?
-
Is the control handle in good operating condition?
-
Check all wiring for fraying and loose ends.
-
Are wheel locks and safety stands secured and operating properly?
-
Are safety stands and wheel locks being used?
-
Are all anchor bolts secure and tight to the floor and frame of the lift?
-
Is the rack clean and free from grease and oily substances?