Title Page
-
Conducted on
-
Prepared by
-
Location
D & K Laminator - Weekly PM - Model - JRNT / Serial # 27-21-128
-
PM Performed By:
-
Select date
-
Clean all brass exhaust mufflers with solvent (Feeder)
-
Wipe off belts (Feeder)
-
Oil all exposed bushing, slides and pivot points (Cutter)
-
Clean nipper roller and pull roller with mild detergent cleaner (Laminator)
-
Comments: regular
Auto Bagger - Weekly PM - Model - HS 100 Excel / Serial # 98-2XL-2664
-
1.) Use SAE #10 oil to lubricate bushings
2.) If Belts need cleaned, use Rubbing Alcohol -
PM Performed By:
-
Select date
-
Bag Sensor (clean or replace)
-
Rubber Roller (clean or replace)
-
Wipe down (clean) machine
-
Lubricate Bushings (4 total)
-
Belts for cracks, tears, tightness
-
Comments:
-
1.) Use SAE #10 oil to lubricate bushings
2.) If Belts need cleaned, use Rubbing Alcohol
Auto Bagger - Weekly PM - Model - HS 100 Excel / Serial # 1009525765
-
PM Performed By:
-
Select date
-
Bag Sensor (clean or replace)
-
Rubber Roller (clean or replace)
-
Wipe down (clean) machine
-
Lubricate Bushings (4 Total)
-
Belts for cracks, tears, tightness
-
Comments:
Auto Bagger - Weekly PM - Model - HS 100 Excel / Serial #2064795741
-
1.) Use SAE #10 oil to lubricate bushings
2.) If Belts need cleaned, use Rubbing Alcohol -
PM Performed By:
-
Select date
-
Bag Sensor (clean or replace)
-
Rubber Roller (clean or replace)
-
Wipe down (clean) machine
-
Lubricate Bushings (4 total)
-
Belts for cracks, tears, tightness
-
Comments:
Shanklin Shrink Wrapper - Weekly PM - Model - F5A/T71 / Serial #: #F0566/T05221
-
1.) Use SAE #10 oil to lubricate drive shaft
2.) Use SAE #30 oil to lubricate conveyor drive chain
3.) Use Lubri-Lab S 350 to grease roller chain fittings -
PM performed By:
-
Select date
-
Clean machine
-
Sealer for wear and cracks
-
Clean Sealer
-
Oil drive shaft lightly
-
Drain water
-
Conveyor drive chain for wear, kinks, tightness
-
Lubricate conveyor drive chain
-
Roller chain for wear, tightness
-
Grease roller chain fittings
-
Comments:
Damark Shrinksystem - Weekly PM - Model - MP1418 / Serial #:6951
-
1.) Use SAE #10 oil to lubricate drive shaft
2.) Use SAE #30 oil to lubricate conveyor drive chain -
PM Performed By:
-
Select date
-
Clean machine
-
Sealer for wear and cracks
-
Clean Sealer
-
Oil drive shaft lightly
-
Drain water
-
Conveyor drive chain for wear, kinks, tightness
-
Lubricate conveyor drive chain
-
Roller chain for wear, tightness
-
Grease roller chain fittings
-
Comment:
Strapper - Weekly PM - Model - RQ-8 / Serial #: 14100119
-
PM performed by:
-
Select date
-
Check for worn parts
-
Tightness on arch screws
-
Alignment of the arch and track springs
-
Comments:
Strapper - Weekly PM - Model - RQ-8 / Serial #: 14203119
-
PM Performed By:
-
Select date
-
Check for worn parts
-
Tightness on arch screws
-
Alignment of the arch and track springs
-
Comments:
Strapper - Weekly PM - Model - RQ-8 / Serial #: 14205119
-
PM Performed By:
-
Select date
-
Check for worn parts
-
Tightness on arch screws
-
Alignment of the arch and track springs
-
Comments:
Strapper - Weekly PM - Model - RQ-8 / Serial #: 14098119
-
PM Performed By:
-
Select date
-
Check for worn parts
-
Tightness on arch screws
-
Alignment of the arch and track springs
-
Comments:
Kluge EHD Press - Weekly PM - Model - EHD / Serial #EHD14x24 *Use the "Kluge EHD Series Press Operator Manual" for reference
-
PM Performed By:
-
Select date
-
Wipe clean the entire machine
-
Check and clean filter in vacuum pump, delivery bar, and feeding head valve
-
Manually lubricate points on operator side (See page 110 in manual)
-
Manually lubricate points on gear side (See page 112 in manual)
-
Lubricate gate lock roller (See page 113 in manual)
-
Lubricate gate lock shaft (See page 113 in manual)
-
Comments: