Title Page
-
Conducted on
-
Lift ID
-
Inspector
-
Location
Inspection
-
Unit Type
-
Please specify
-
Execute a visual inspection of all of the parts of the equipment, check for missing pieces, torn or loose hoses, and replace as necessary.
-
Check for fluid leaks and ensure proper fluid levels for oil, hydraulic, coolant and fuel
-
Check for any tire damage
-
Check wheel lugs for tightness or looseness
-
Inspect cables and hoses for worn parts
-
Check for cracked welds
-
Check for platform rails and safety gage damages
-
Check for bent or broken structural elements
-
Check pivot pins for security
-
All warnings and labels should be legible and in place
-
Inspect the platform control. Ensure the load capacity is clearly marked.
-
Ensure that platforms are not slippery
-
Check the hydraulic system pressure. If it’s not in the ideal level of pressure, determine the reason and repair accordingly.
-
Check base controls, platform controls, all switches and buttons, for proper operation.
-
Ensure that the drive controller returns to neutral.
-
Inspect horn, gauges, lights, and back-up alarms and ensure that they are in safe working order
-
Clear the workplace zone as well from the following hazards:
-
Drop-offs or holes
-
Any debris, bumps & floor obstructions
-
Overhead obstructions
-
Live wires or energized power line
-
Pedestrian or vehicle traffic
-
Wind or weather conditions that may affect operation
-
Any other hazardous locations
Completion
-
Recommendations
-
Inspector (name and signature)
