Title Page

  • Address

  • Engineer

  • Conducted on

  • Air Source Heat Pump Model & Serial No:

  • Is this a FTC2 System (Older installation, Unvented Cylinder, S Plan on Standard Honeywell timer etc)<br>

  • Ensure Cylinder Benchmark is filled out for Cylinder Warranty purposes and take picture.

  • Visual Condition of Unvented cylinder<br>

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Maintenance

  • Condition Of External Unit Casing

  • Please Give Details Of Fault And Actions Taken To Rectify

  • Collector Fins free From debris

  • Please Give Details Of Fault And Actions Taken To Rectify

  • Visual Condition of Unvented cylinder<br>

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Expansion Vessel Checks OK<br>

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Expansion Relief Valve checked<br>

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Temperature and Pressure Relief Valve Checked<br><br>

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Electrical Connections

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Pipe Connections

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Mechanical Tasks:

  • Check Visually For Signs Of Oil Leaks Which May Indicate A Refrigerant Leak.

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Check Integrity Of Water Pipe Work and Lagging ( Repair Lagging If Required)<br>

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Check System Operation

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Check And Record Anti-Freeze And If Necessary Top Up To Manufactures Recommendations. (-10 to -20 degrees C)

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Inline particulate Mesh filter cleaned

  • Please Give Details Of Fault And Actions Taken To Rectify

  • Check And Clean The Magnetic Particle Filter

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Check System Pressure

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Release Any Air From The Primary/Heating Control<br>

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Check The Correct Operation And Temperature Setting of Roomstat

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Check The Operation Of The Zone Valve

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Smoke alarm tested and functioning correctly

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • CO Alarm tested and functioning correctly

  • Please Give Details Of Fault And Actions Taken To Rectify.

  • Unvented Cylinder Checks

  • Is Cylinder Free From Leaks

  • Please Give Details Of Fault And Actions Taken To Rectify

  • Meter Readings

  • Outdoor Unit

  • Water Heater

  • Main Meter

  • Additional Information

  • Additional Pictures

  • Customers signature

  • Engineers Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.