Information
-
Document No.
-
Audit Title
-
Conducted on
-
Audit completed by
- Randy Robinson
- Ryan Decker
- Bruce Stemler
-
Location
Parking
-
Parked in safe location (facing with traffic, pulled through, or backed in) comes placed and doors locked ?
Property assessment and access
-
Observers property for layout and hazards before accessing property and walks safest path to meter?
-
Looks at notes in handheld to help identify known hazards?
-
Looks for oncoming traffic before crossing roads or accessing truck?
-
Were dog procedures followed correctly?<br>Ie. Homeowner asked to confine dogs if home, yard surveyed for signs of dog if homeowner not home.
-
Tech is not distracted while walking. <br>(Ie. Not looking at handheld, route sheet, etc.)
-
Tech has tools safely stored in tool pouch or bag (pointed side down)?
-
Utilizing Yak Trax when applicable (snow or icy conditions)
-
Tech has proper Nisource I.D
-
Tech recalls safety content of morning meeting.
Gas
Gas
-
Is gas meter being worked on?
-
Proper PPE is worn? (Hard hat, safety glasses)
-
Tech knows gas leak procedure? (Call supervisor, Trucheck office)
-
Recognizes potential hazards at the meter and uses best judgement to avoid them?
-
Tech uses good ergonomics while at the meter?
Electric
Electric
-
Is electric meter being worked on?
-
Proper PPE is worn correctly? (FR clothing on exterior and top button, sleeves down, hard hat, safety glasses, face shield, rubber gloves with leather covers)
-
Glove check completed before work day started?
-
Recognizes potential hazard at the meter and uses best judgement to avoid them?
-
Attempts to notify homeowner of temporary loss of power?
-
Inside of meter can inspected for damage or stressed wires?
-
Tech looks and identifies underground or overhead service and visually inspects incoming lines/rain heads?
-
Meter pulled smoothly
-
Back of meter inspected and jaws tested with voltmeter?
-
New meter installed safely (gently pushed into place)?
-
Reinstalled cover or ring?
-
Rubber gloves, leather overs, and face shield utilized form seal to seal?
-
Proper and insulated tools were used if necessary?<br>(Only supervisor working inside meter box)
-
Gloves are packed back into the glove bag, cuff down?
Ending of audit
-
Did any incidents occur on this audit?
-
Did the tech have any questions or concerns as to being able to perform the work safely?
-
Any additional comments regarding the installations weather the be positive, negative or corrective.
-
Follow up needed with this tech?