Title Page
-
Ipad / Case Asset Number
-
Conducted on
-
Prepared by
-
Location
Visual Inspection
Area in Compliance for Use
-
The location's EPL / Zone is appropriate for the equipment's use (EXd)?
-
Are there any areas or equipment where there is excessive accumulation of dust or debris?
-
How would you rate the overall condition of equipment in relation to potential ignition sources?
-
Case Inspection
-
Are any cracks, dents, or other damage to the case noted?
-
Are all screws and rivets tight?
-
Are there any gaps or holes in the case that could allow entry of dust or moisture?
Battery
-
Has the battery charging access cover been properly secured?
-
Is any corrosion noted on the battery connector?
-
Is any leakage or other moisture visibly present inside of the case?
Connectors
-
Is there any damage to the battery connector such as bent pins or broken sockets?
-
Does the battery cable properly seat in the connector?
-
Is there any corrosion present on the battery connector?
Display
-
Are there any cracks, scratches, or other damage to the display?
-
Are there any signs of condensation or moisture behind the display cover?
-
Is the display cover fully secured into the case?
-
Is the display fully functional?
-
Buttons and Switches
-
Do all buttons and switches operate as intended?
-
Are there signs of wear or damage to the buttons or switches?
-
Are all buttons and switches labeled?
Labels and Markings
-
Labels - Are all labels clear, legible, and secure?
-
Markings - Are all required markings present and legible, such as the ATEX certification mark and unique unit identifying number (serial number / asset number)?
-
Accessories - Are any accessories used also ATEX approved?
Documentation
-
When was the last inspection conducted?
-
Is there a documented maintenance and inspection schedule for ATEX equipment?
-
Please provide a photo of any damaged or deteriorated equipment discovered during the inspection.
-
Inspected by