Atlas Tube Crane Pre-Shift Inspection

• Site conducted

  Select

• Conducted on

  Date

• Prepared by

• Equipment Inspected

• Have I received training and fully understand the operation?

  Yes

  No

  N/A

• Inspect pendant and wiring

  Pass

  Fail

  N/A

• Power Supply (battery, if remote)

  Pass

  Fail

  N/A

• Emergency Stop button - Ensure operation is disabled when pushed.

  Pass

  Fail

  N/A

• Crane Movement - Operate controls in all directions: Hoist, trolley, bridge. Are controls working in correct direction?

  Pass

  Fail

  N/A

• Upper/Lower Limits - Does Upper limit switch stop crane hoist? Does Lower limit switch stop crane hoist?

  Pass

  Fail

  N/A

• Hook and Latch - Is there evidence of wear or damage?

  Pass

  Fail

  N/A

• Block and Drum - Is cable wrapped around the grooves of the drum correctly? Are there cracks in the welds of the fork assembly or hook block?

  Pass

  Fail

  N/A

• Warning Device and Labels - Does alarm sound when pressed? Are capacity labels in place and legible?

  Pass

  Fail

  N/A

• Fire Extinguisher - Is the extinguisher present and not expired?

  Pass

  Fail

  N/A

• Brakes - Operate and check all brakes: Hoist, Trolley, and bridge (Eddy breaks or floor breaks).

  Pass

  Fail

  N/A

• Leakage - Note presence of oil or any other leakage.

  Pass

  Fail

  N/A

• Unusual Sounds - Note any unusual sounds while operating.

  Pass

  Fail

  N/A

• Housekeeping - Clear the area of all slip/trip hazards, report poor lighting, or other unsafe conditions.

  Pass

  Fail

  N/A

• Slings and Attachments - Are nylon slings in acceptable condition? Are safety latches working? Are crane forks/hook in good condition? Are capacity labels present and legible?

  Pass

  Fail

  N/A

Additional Comments

• Additional comments from Operator