• Indicator
    O - Can run but needs to repair/clean
    F - Failure stop machine
    ✔ - In good conditions

  • Part:

    Picture1.jpg
  • Area: Main Entrance
    Activity: To check room temp., humidity and thermohygrograph condition.
    Method: Visual
    Standard:
    Temp.: 25°C +/- 5°C
    Humi.: 50-80 %
    Area is clean from dust.
    Class/ Category: General
    Time(s): 30

  • Condition

  • Part:

    Picture13.jpg
  • Area: 1, 2, 3 & 4
    Activity: To check dust at machine's wall area (inside & outside).
    Method: Visual
    Standard: Dust free
    Class/ Category: 5S
    Time(s): 5

  • Condition

  • Part:

    Picture2.png
  • Area: 1
    Activity: To check air pressure gauge reading at main FR unit Method: Visual
    Standard: 6 bar ±0.2
    Class/ Category: Pneumatic
    Time(s): 30

  • Condition

  • Part:

    Picture4.png
  • Area: 1
    Activity: To check FR bowl.
    Method: Visual
    Standard: No water / oil accumulated
    Class/ Category: Pneumatic/ FRL
    Time(s): 30

  • Condition

  • Part:

    Picture6.png
  • Area: 1
    Activity: To check air leakage at main FR area.
    Method: Visual & hearing
    Standard: No 'hissing' sound
    Class/ Category: Pneumatic/ FRL
    Time(s): 30

  • Condition

  • Part:

    Picture 31).jpg
  • Area: 1
    Activity: To check air pressure gauge reading at laser FR unit.
    Method: Visual
    Standard: 2 bar ±0.2
    Class/ Category: Pneumatic
    Time(s): 30

  • Condition

  • Part:

    Picture 31).jpg
  • Area: 1
    Activity: To check air leakage at laser FR area. To check bowl.
    Method: Visual
    Standard: No 'hissing' sound. No oil and water.
    Class/ Category: Pneumatic
    Time(s): 30

  • Condition

Untitled Page

  • Part:

    Picture 32.jpg
  • Area: 1
    Activity: To check grease level.
    Method: Visual
    Standard: Grease is above minimum level.
    Class/ Category: Lubrication
    Time(s): 180

  • Condition

  • Part:

    Picture7.png
  • Area: 1
    Activity: To check grease level indicator.
    Method: Visual
    Standard: Min level (red) and green level (max) not activated
    Class/ Category: Lubrication
    Time(s): 30

  • Condition

  • Part:

    Cabinet.jpg
  • Area: 1
    Activity: To check electrical cabinet door.
    Method: Visual
    Standard: Electrical cabinet door is close and locked.
    Class/ Category: Safety
    Time(s): 30

  • Condition

  • Part:

    Cabinet.jpg
  • Area: 1
    Activity: To check electrical cabinet area.
    Method: Visual
    Standard: Dust free
    Class/ Category: 5S
    Time(s): 30

  • Condition

  • Part:

    Picture8.png
  • Area: 1
    Activity: To check cabinet's aircond unit and filter condition.
    Method: Visual
    Standard: Dust free
    Class/ Category: 5S
    Time(s): 30

  • Condition

  • Part:

    Picture9.png
  • Area: 1
    Activity: To check Dust Collector dustbin.
    Method: Visual
    Standard: Dustbin is empty
    Class/ Category: Dust collector
    Time(s): 30

  • Condition

  • Part:

    Picture9.png
  • Area: 1
    Activity: To check Dust Collector area.
    Method: Visual
    Standard: Dust free Class/ Category: Dust collector
    Time(s): 30

  • Condition

Untitled Page

  • Part:

    Picture12.png
  • Area: 1
    Activity: To check vacuum gauge reading.
    Method: Visual
    Standard: Above -1 bar below -0.9bar Class/ Category: Vacuum
    Time(s): 30

  • Condition

  • Part:

    Picture10.png
  • Area: 1
    Activity: To check oil vacuum pump level and area.
    Method: Visual
    Standard: Oil is above minimum level Class/ Category: Vacuum
    Time(s): 30

  • Condition

  • Part:

    Picture11.png
  • Area: 1
    Activity: To check vacuum pump motor temperature.
    Method: Test
    Standard: Operating temperature between 75 to 95°C Class/ Category: Dust collector
    Time(s): 30

  • Condition

  • Part:

    Picture17.jpg
  • Area: 4
    Activity: To check controller display.
    Method: Visual
    Standard: No message/ alarm. Class/ Category: General
    Time(s): 10

  • Condition

  • Part:

    Picture18.png
  • Area: 4
    Activity: To check front and rear door lock in good condition
    Method: Test
    Standard: Door is in lock position when pressing door button. Class/ Category: Safety
    Time(s): 30

  • Condition

  • Part:

    Picture21.jpg
  • Area: 2 & 4
    Activity: To check bolt & tightening at door lock area.
    Method: Visual & test
    Standard: Bolt follow marking point. Door lock not loosed. Class/ Category: Bolt & Tightening
    Time(s): 180

  • Condition

  • Part:

    Picture20.jpg
  • Area: 1, 2, 3, 4, & 5
    Activity: To check emergency button in good condition.
    Method: Press by hand
    Standard: Emergency stop message appear at controller Class/ Category: Safety
    Time(s): 180

  • Condition

Untitled Page

  • Part:

    Spindle.jpg
  • Area: 6
    Activity: To check tool change condition (hold tool and press release button).
    Method: Press by hand
    Standard: Arbor can be smoothly release after button is push. Class/ Category: Power Transmission
    Time(s): 30

  • Condition

  • Part:

    Nose Spindle.jpg
  • Area: 6
    Activity: To check electro spindle nose area.
    Method: Visual
    Standard: Dust free. No foreign object Class/ Category: Power Transmission
    Time(s): 30

  • Condition

  • Part:

    temp Motor.jpg
  • Area: 6
    Activity: To check electro spindle temperature.
    Method: Test
    Standard: Operating temperature between 25 to 40°C. Class/ Category: Power Transmission
    Time(s): 30

  • Condition

  • Part:

    Spind Motor.jpg
  • Area: 6
    Activity: To check A-axis temperature.
    Method: Test
    Standard: Operating temperature between 25 to 40°C. Class/ Category: Power Transmission
    Time(s): 30

  • Condition

  • Part:

    Hose vaccum.jpg
  • Area: 6
    Activity: To check suction hose area.
    Method: Visual
    Standard: No vacuum leak Class/ Category: Dust collector
    Time(s): 30

  • Condition

  • Part:

    Picture26.png
  • Area: 6
    Activity: To check bolt & tightening at suction hood morotize cover.
    Method: Visual
    Standard: Bolt follow marking point. Class/ Category: Bolt & Tightening
    Time(s): 30

  • Condition

  • Part:

    Magazine.jpg
  • Area: 6
    Activity: To check dust at tool magazine area.
    Method: Visual
    Standard: Dust free Class/ Category: 5S
    Time(s): 180

  • Condition

  • Part:

    Arbor.jpg
  • Area: 5
    Activity: To check dust/rust at arbor.
    Method: Visual
    Standard: Dust free and no foreign object Class/ Category: 5S
    Time(s): 10

  • Condition

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. Any ratings or scores displayed in our Public Library have not been verified by SafetyCulture for accuracy. Users of our platform may provide a rating or score that is incorrect or misleading. You should independently determine whether the template is suitable for your circumstances. You can use our Public Library to search based on criteria such as industry and subject matter. Search results are based on their relevance to your search and other criteria. We may feature checklists based on subject matters we think may be of interest to our customers.