Title Page
-
Location: Kitting B1
Equipment: Plycutter 8 -
Month
- January
- February
- March
- April
- May
- June
- July
- August
- September
- October
- November
- December
-
Date
-
Checked by
-
Staff Id
-
Verified by
Inspection 1/4
-
Shift
-
Machine Mapping
-
Part:
-
Area: Control panel Activity: Cleaning and Check CPU Method: Visual Standard: Clean and Wipe Time : 1 min
- O - Can run but needs to repair/clean
- F - Failure stop mahine
- ✔ - In good conditions
-
Part:
-
Area: Bristle Block Activity: Cleaning Carbon Dust Method: Visual Standard: Clean Debris Prepreg Time : 5 min
- O - Can run but needs to repair/clean
- F - Failure stop mahine
- ✔ - In good conditions
-
Part:
-
Area: Cutter Head Activity: Check blade roller cleanliness Method: Visual Standard: Clean and Wipe Time : 2 min
- O - Can run but needs to repair/clean
- F - Failure stop mahine
- ✔ - In good conditions
-
Part:
-
Area: Y-rail & track Activity: Cleaning Carbon Dust Method: Visual Standard: Clean and Wipe Time : 2 min
- O - Can run but needs to repair/clean
- F - Failure stop mahine
- ✔ - In good conditions
-
Part:
-
Area: Knife presser bowl<br>Activity: Check Presser condition & Clean<br>Method: Visual<br>Standard: Check the Presser surface for any dirt, clean & wipe and do the replacement if necessary<br>Time(s): 5 min
-
Enter time checking
-
Enter time checking
-
Enter time checking
-
Part:
-
Area: Machine Knife<br>Activity: Check & Change new blade<br>Method: Visual<br>Standard: Check every shift change if cutting quality turn bad or knife blunt.<br>Time(s):
-
Is the knife in good condition
-
Enter time changing knife
-
Is the knife in good condition
-
Enter time changing knife
-
Is the knife in good condition
-
Enter time changing knife
-
Part:
-
Area: FRL unit Activity: Check for fluids in air reducer / filter and air pressure level Method: Visual Standard: Drain any fluids existance in air reducing filter . Check incoming air pressure level (80-110psi) Time: 1 min
- O - Can run but needs to repair/clean
- F - Failure stop mahine
- ✔ - In good conditions
-
Machine Mapping
-
Part:
-
Area: Control panel Activity: Cleaning and Check CPU Method: Visual Standard: Clean and Wipe Time : 1 min
- O - Can run but needs to repair/clean
- F - Failure stop mahine
- ✔ - In good conditions
-
Part:
-
Area: Bristle Block Activity: Cleaning Carbon Dust Method: Visual Standard: Clean Debris Prepreg Time : 5 min
- O - Can run but needs to repair/clean
- F - Failure stop mahine
- ✔ - In good conditions
-
Part:
-
Area: Cutter Head Activity: Check blade roller cleanliness Method: Visual Standard: Clean and Wipe Time : 2 min
- O - Can run but needs to repair/clean
- F - Failure stop mahine
- ✔ - In good conditions
-
Part:
-
Area: Y-rail & track Activity: Cleaning Carbon Dust Method: Visual Standard: Clean and Wipe Time : 2 min
- O - Can run but needs to repair/clean
- F - Failure stop mahine
- ✔ - In good conditions
-
Part:
-
Area: Knife presser bowl Activity: Check Presser condition & Clean Method: Visual Standard: Check the Presser surface for any dirt, clean & wipe and do the replacement if necessary Time(s):
- O - Can run but needs to repair/clean
- F - Failure stop mahine
- ✔ - In good conditions
-
Part:
-
Area: Machine Knife Activity: Check & Change new blade Method: Visual Standard: Check every shift change if cutting quality turn bad or knife blunt. Time(s):
- O - Can run but needs to repair/clean
- F - Failure stop mahine
- ✔ - In good conditions
-
Part:
-
Area: FRL unit Activity: Check for fluids in air reducer / filter and air pressure level Method: Visual Standard: Drain any fluids existance in air reducing filter . Check incoming air pressure level (80-110psi) Time: 1 min
- O - Can run but needs to repair/clean
- F - Failure stop mahine
- ✔ - In good conditions
