Title Page

DATA REPORT - REVERSE OSMOSIS SYSTEM

  • AUDIT TITLE

  • Date

  • Customer #

  • Work Order #

  • Sales Order #

  • Part #

  • Model #

  • Serial #

  • GPD @77F

Data Report - Motor/Membranes:

  • Motor Model:

  • Motor Serial #:

  • HP:

  • Motor Stated Amp Draw:

  • Voltage:

  • Hertz:

  • Phase:

  • Wire Size AWG:

  • Pump Model #:

  • Pump Serial #:

  • Controller Serial #:

  • Pressure Gauges:

  • Flow Meters:

  • Membrane Model:

  • Other:

  • Membrane Diameter:

  • Membrane Length:

Membrane Quantity/Serial Numbers:

  • Membrane Serials #:

Data Report Pressure Vessels:

  • Pressure Vessel Model:

  • Pressure Vessel Diameter:

  • Pressure Vessel Length:

  • RO Array:

  • Date Started:

  • Verified By:

Preliminary Checks:

  • Motor Voltage Match To Order:

  • Membrane Element Quantity Match to Order:

  • TDS of Feedwater:

  • PPM:

  • Feedwater Temperature F - conversion factor:

  • Temperature F:

  • Feedwater Hardness GBG:

  • GBG:

  • Feedwater pH:

  • pH:

  • Chlorine Concentration mg/L:

  • mg/L:

  • System Flooded Before Start-up:

  • Flush system @ 50 psig:

  • Leak check @ 180 psig:

Flow / Rejection Rates:

  • Permeate (gpm):

  • Flow Meter Range:

  • Specification:

  • Test Flow Rates:

  • Concentrate (gpm):

  • Flow Meter Range:

  • Specification:

  • Test Flow Rates:

  • Concentrate Recycle (gpm):

  • Flow Meter Range:

  • Specification:

  • Test Flow Rates:

  • Feedwater Flow:

  • Specification:

  • Test Flow Rates:

  • % Recovery - Overall:

  • Permeate flow / Total Feed flow (Concentrate + Permeate) = % recovery

  • Specification:

  • Test Flow Rates:

  • Permeate Salt Rejection %:

  • Feed TDS – Permeate TDS = Sum / Feed TDS x 100 = % Rejection

  • Specification:

  • Rejection:

  • Permeate pH:

  • pH:

  • Blending:

  • Specification:

  • Test Flow Rates:

System Pressures:

  • Static System Pressure Check (15 min):

  • Feed Pressure:

  • psig:

  • Pump Discharge Pressure:

  • psig:

  • Low Pressure Switch psig:

  • psig:

  • Concentrate Pressure:

  • psig:

Controller Functions/Manual Switch:

  • Inlet Solenoid Opens and Closes:

  • Pump Starts After Delay:

  • Delay in Seconds:

  • Low Pressure Shutdown:

  • psig:

  • Automatic Low Pressure Reset:

  • Flush Cycle Function:

  • Autoflush Interval (Default Tank Full):

  • 24 Hours

  • Autoflush Duration (Default 300 Sec):

  • Tank Full Shutdown:

  • High Pressure Shutdown:

  • Tank Full Pressure Switch Shutdown:

  • Pretreatment Lockout Function Shutdown:

  • TDS Audible Alarm Function:

  • Chemical Injection Outlet Voltage:

  • Output Voltage:

Controller Functions/Comparison of TDS Probe and Hand Held Meter:

  • Feed:

  • Hand Held Meter:

  • RO Controller Meter:

  • Product:

  • Hand Held Meter:

  • RO Controller Meter:

AMP Draw:

  • Specified Motor Amp Draw:

  • L.1:

  • L.2:

  • L.3:

  • System Overall Amp Draw Average:

Preservative Solution:

  • Solution Added:

Anti-Freezing Solution:

  • Solution Added:

Visual Inspection:

  • Paint/Exterior Finish:

  • Components Firmly Attached:

  • Piping is Square:

  • Electrical Fittings and Covers Secured:

  • Component Identification Labels:

  • Pre-Filter Configuration:

  • Flow Arrows on Vessels:

  • Feed/Permeate Concentrate Labels:

  • Electrical Connections Re-Tightened:

  • Caution Warning Labels Applied:

  • Branding Label Applied:

Notes:

  • Hand Held TDS Meter Serial #:

  • Notes:

Assembled By:

  • Assembler:

  • Signature:

  • Date:

Approved By:

  • QA/Test Technician:

  • Signature:

  • Date:

  • IMAGES

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.