Baggage Scanner Inspection (ET&L)

• Conducted on

  Date

• Prepared by

• Location
  Address

• This inspection checklist is designed as a tool to help people enhance their safe dealings with baggage scanners. It should not be seen as a holistic inspection and may not identify all areas of non-compliance with applicable legislative responsibilities. The requirements in this inspection are based on those found in RHS 21 - Statement on cabinet X-ray equipment for examination of letters, packages, baggage, freight and other articles for security, quality control and other purposes (1987), which can be found on the website:
  https://www.arpansa.gov.au/sites/default/files/legacy/pubs/rhs/rhs21.pdf

Premises/Site Section

• Operators are trained? (Evidence: Training Records attached/observed)

  Yes

  No

  N/A

• Personnel Authorised to Operate the X-Ray Unit? (Attach if appropriate)

  Yes

  No

  N/A

• Comments/observations

X-ray units

• Click on 'Add unit' to add each baggage scanner

Unit

• serial number/Identifier for this unit

Physical inspection

• Photo of Make/Model/serial number

  Media

• Does the observed Serial Number matches the record?

  Yes

  No

  N/A

• Select Type of unit: [S5, RHS21]

  Select Small baggage (e.g. carry-on) Large cargo (human access) Doors (no human access e.g. mail)

  • Small baggage (e.g. carry-on)
  • Large cargo (human access)
  • Doors (no human access e.g. mail)

• Does the door have two working interlocks to prevent operation while door is open? (see note on interlocks below)

  Yes

  No

  N/A

• For carry-on baggage as used airline,shipping security etc equipment - is it arranged so the operator can readily observe all ports and doors (entry/exit) during generation of X-rays? [can include direct or via cameras - s10, RHS21]

  Yes

  No

  N/A

• If a conveyor moves objects into the primary beam - How is it ensured that it is not easy to insert any part of the human body into the primary beam? (evidence: controlled through barriers or control by trained persons).

  Select Barrier (e.g. perspex) Trained Operators only Other None N/A

  • Barrier (e.g. perspex)
  • Trained Operators only
  • Other
  • None
  • N/A

• Photo of perspex barrier in place (required for carry-on style in a place the public has access - e.g. if they place bags on the conveyor)

  Media

• Description of arrangements

• All the following additional requirements shall be met by equipment which allows the admission of human beings to the interior for purposes associated with the operation of the equipment (e.g. equipment used for the examination of large items of freight):

• Are there controls within the cabinet which can be used to terminate or prevent the production of X-rays?

  Yes

  No

  N/A

• Are there any other means by which X-ray generation can be controlled from within the cabinet?

  Yes

  No

  N/A

• Is there an audible and visible signals within the cabinet activated for at least ten seconds prior to the production of X-rays?

  Yes

  No

  N/A

• Is there a further visible warning signal within the cabinet which is active when X-rays are produced?

  Yes

  No

  N/A

• Is there a clearly visible, legible signs describing the meaning of the warning signals above. These signs shall be adequately illuminated when the main power control is in the ‘on’ position?

  Yes

  No

  N/A

• Info: In RHS21(s4, RHS21) a safety interlock means a device intended to prevent exposure of any part of the human body to the primary X-ray beam by preventing production of X-rays while any door or access panel leading to the interior of the cabinet is open. Failure of any component of the equipment shall not cause the failure of more than one safety interlock.

• Are appropriate indicator lights used? (Evidence: The production of X-rays is indicated by two independent lights that are clearly discernible from each point at which production of X-rays may be initiated. These indicator lights shall be labelled ‘X-RAYS ON’. One of these lights indicates when voltage is applied to the primary windings of the X-ray tube high tension transformer. Failure of any single component shall not result in the failure of both indicator lights to operate. [s8,RHS21])

  Yes

  No

  N/A

• Is appropriate warning signage used? (evidence: Photo or observation - A clearly visible sign bearing an ionizing radiation warning symbol (trefoil) is on the equipment adjacent to the controls. It has the words ‘CAUTION’ and should included 'X-RAY APPARATUS - This unit produces radiation when energised' [S9, RHS21])

  Yes

  No

  N/A

• Notes on Physical inspection (if any)

Security

• Controls can be locked-out with a key? (evidence: observation/photo) [S6, RHS21]

  Yes

  No

  N/A

• When the unit is not in operation the key is stored securely?

  Yes

  No

  N/A

• Where is the Key stored?

• Additional Comments (if Any)

• Inspection completed

  Sign