Information

  • Document No.

  • Conducted on

  • Prepared by

  • Location
  • Personnel

Equipment Data

  • Type:

Daily Safety Inspection

  • The operator completes the safety Pre-shift safety inspection correctly

  • The operator fully understands the capacity information plate?

Operator Safety & Observation

  • The operator mounts / dismounts correctly?

  • Uses the seatbelt correctly?

  • Keeps body parts within the confines of the vehicle?

  • Operator looks in the direction of travel?

  • Correct use of the horn when appropriate?

  • Follows the correct procedures for an "unattended" vehicle?

  • Operator had good all round safety observation?

Steering & Operating Controls

  • Starts and stops smoothly?

  • Correct use of the steering assistor?

  • Brakes harshly / erratically?

  • Operates the hydraulic controls when the lift truck is in motion?

  • Rough use of hydraulic controls?

  • Operates and understands the controls?

Competency In Load Capacity

  • Operator matches load with the trucks capacity?

  • Operator checks the load for stability?

Manoeuvring & Transportation

  • Fork arms central under the load?

  • Forks too High when traveling?

  • Forks too low when traveling?

  • Operating in reverse, looking in the direction of travel?

  • Operates at a speed consistent with the type of load and working conditions?

  • Operator performs safe maneuvering with the lift truck and load!

Stacking & de-stacking

  • Incorrect set down at a vertical face?

  • Operator applies the park brake when operating the hydraulics?

  • Operator applies neutral when operating the hydraulics?

  • Fork arms not rubbing (entry / withdrawal)?

  • Fork tips touch the stack / load?

  • Forks / load not level?

  • Load correctly stacked?

  • Fork arms not fully inserted (undercut) ?

  • It is some times necessary to undercut a load due to the nature of where it is to be located. It must remain within the limits of the capacity plate.

Parking

  • The operator correctly applies the park brake?

  • The operator sets the direction lever to the neutral position?

  • The operator correctly applies forward tilt?

  • The operator correctly lowers the fork arms?

  • The maneuvering wheels are in the straight position?

  • The operator switches off and removes the key?

Assessment Recommendations & Evaluations

  • Assessors evaluation of operator safety?

  • Comments

Signatures

  • Date and time of assessment

  • Operators Signature

  • Evaluators Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.