Title Page
-
Site conducted
-
Conducted on
-
Prepared by
-
Location
-
Job #
Personal Protective Equipment
-
Hard Hats Worn At All Times
-
Safety Glasses With Sideshield
-
Face Shields When there Is Potential For Flying Debris
-
Hearing Protection Where Required
-
Full Body Harness With Lanyard Where Needed
Hot Work
-
Fire Protection (Extinguisher / Tarpaulins)
-
Fire Extinguisher Inspected and Tagged
-
Welding Shields In Use
-
Cylinders Secured And Capped When Not In USe
-
Leads And Hoses In Good Condition
Walking/Working Surfaces
-
All Floor Openings And Holes Greater Than 2” Cvered
-
Aisle ways Are Clear Of Hazards Such As: Ext Cords, Welding Leads And Stored Material
-
All Leading Edges With Falls. Greater Than 6’ Protected
-
Welding Rod/All Thread Stubs Are Placed In A Bucket/Trash Container
-
Work Is Properly Illuminated
-
Roof Top Work Has Proper Fall Protection System
-
How Often Is Clean-Up Being Done Per Day
Material fitting/Handling
-
Emmplooyee’s Are Using Proper Lifting Techniques, Etc
-
Slings Are In Good Condition
-
Rigging Is Being Inspected Before Each Use
-
Shackles Are Used On All Multi-Leg Piks
-
Cranes, Chains Falls, Come-Along And Air Tuggers Are Properly Sized And Used In A Safe Manner
-
Porta Powers Are Properly Sized And Used In A Safe Manner
Scaffolds And Manlifts
-
Number Of Scaffolds Your Crew Is Using
-
Handrails And Toe Boards Are In In Place
-
Scaffolds Have Proper Access And Are Tagged , Dated And Inspected By A Competent Person
-
Fall Protection Used In Boomlifts
-
Fall. Protection Requirements For Scissor Lifts Are eying Met
Excavations
-
Excavation Depth Is ____________Feet
-
Designated Competent Person Is
-
5’ Or More In Depth - Shored Or Benched
-
Spoil Is A Minimum of 2’ From Edge Of Excavation
-
Excavation Are Inspected Daily For Any Changed In Working Conditions
-
Entry Permits Are Filled Out And Posted For Excavations Greater Than 5’
-
Protective Systems For Excavation Over 20’ In Depth Have Been Designed By A Professtional Engineer
-
Proper Access/Egress Is Provided
Ladders
-
All Ladders Free Of Defects
-
Step Ladders Used In Only The Open Position
-
Straight Ladders Are Being Used At Proper Angle
-
Straight Ladders Are Equipped With Safety Feet And Are Secured to Avoid Displacement
-
Access To Ladders Free Of Debris And/Or Obstructions
Power Tools
-
Power Cords In Good Conditon
-
Guards In Place
-
Ground Fault Interruption Protection Is Being Used
Questions For Foreman
-
I Am Working With PM To Resolve Any Of The Above Issues
-
Was A Project Saafety Analysis Performed On this Project
-
Current Safe Behavior By Craftsman
-
Daily Job Hazard Analysis
-
Are We General Contractor or Subcontractor
-
Comments Or Complaints (Explain If Any No’s Aboe)
-
Take A Photo Of Concerns
-
Name Of Safety Committee Mamber Doing Inspection
