Information

  • Document No.

  • Audit Title

  • Client / Site

  • Conducted on

  • Prepared by

  • Location
  • Personnel

Brake & Tire Inspection B-1

  • Scan vehicle barcode

  • Reset andon

  • Rack vehicle

  • Raise vehicle and check undercarraige

  • Lower vehicle

  • Remove hub / center cap

  • Inspect wheel

  • Inspect tire

  • Inspect front-end play

  • Remove wheel

  • Inspect lugs and studs

  • Remove front caliper

  • Inspect front pads

  • Inspect front rotors

  • Lube contact points

  • Inspect caliper slides

  • Mount caliper

  • Mount wheel

  • Tighten lug nuts

  • Mount hub / center cap

  • Remove hub / center cap

  • Inspect wheel

  • Inspect tire

Brake & Tire Inspection B-2

  • Remove wheel

  • Inspect lugs and studs

  • Remove rear caliper / drum

  • Inspect rear shoes / pads

  • Inspect drum / rotor

  • Inspect wheel cylinder

  • Adjust brake shoes

  • Mount caliper / drum

  • Mount wheel

  • Tighten lug nuts

  • Mount hub / center cap

  • Release safety

  • Lower vehicle

  • Reset lift arms

  • Add dye

  • Record combination time

  • Signature of auditor

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.