Title Page
-
Conducted on
-
Prepared by
-
Location
Untitled Page
-
Have you spoken to the customer in regards to location ? Please note agreed location.
-
If other than at water meter, have additional costs been discussed and agreed?
-
Is a PRV installed? Photo included
-
What is the static pressure at the front garden tap. Photo included
-
Has the plastic and labels been removed from the filters and have the filters been installed in the correct order? Sediment, Resin, Carbon ( left to right). Photo included
-
Ensure the filter housing isn’t over tightened
-
Has the copper been set up low enough to allow removal of filter housing and upgrade to 15’’ if required ( approx. 150mm below stainless steel frame ). Photo included
-
Has 3 ball valves and 1 x check valve been installed? Photo included
-
Has a 25x20mm POLY hex nipple been used? Photo included
-
Has LOKTITE 55 been used on all fittings? Photo included
-
Is there 180mm +- 20mm between the base of the cover and the FFL? Photo included
-
Has a chlorine test been completed post filter install? And if so, is the water clear? Photo included
-
Have you taken a picture of the final install, visually showing the bypass ball valve in the off position?
-
Has the filter spanner been left in the filter housing? Photo included
-
Have the screws been installed in the cover to ensure the cover doesn’t fall off? Photo included
-
Has the customer been shown the final set up and is happy with the outcome?
