Title Page

  • Site conducted

  • Installers Name

  • Vehicle Registration

  • Fleet ID

  • Photo of Vehicle Registration Plate

Installation Details

  • INSTRUCTIONS

    1. Answer the questions below and perform the tests as listed.
    2. Add photos and notes by clicking on the paperclip icon.
    3. Complete audit by providing digital signature.

  • Installation Start Time

Installation Details

  • Vehicle Make:

  • Vehicle Model:

  • Body Type

  • Radio ID:

  • Radio Serial Number:

  • New Radio or Existing Radio

PRE INSTALLATION VEHICLE CHECK

  • Is there any Existing damage to the vehicle?

  • List ALL Damage and take photos

  • Check the Vehicle for signs of Fuel Leaks

  • Take a photo

  • Check the Dashboard Instrument Cluster for any warnings

  • Take a photo

  • Test Heater & Air Conditioner

  • Which part is NOT working?

  • Test Windscreen Wipers

  • Which part is NOT working?

  • Test Left & Right turn indicators

  • Which indicators are NOT working?

  • Test Brake & Tail lights

  • Which lights are NOT working?

  • Test Vehicle Horn

  • Test Headlights

  • Take a Photo

INSTALLATION CHECK WITH ENGINE IDLING

DC Cable & Ignition Sense

  • New DC cable installed from Battery (Converter) to Radio

  • New DC Converter Supplied & Installed

  • Firewall penetration sealed with silicone

  • Enter Volts at Battery (Converter)

  • Enter Volts at Radio

  • Value of Positive Fuse

  • Value of Ignition Fuse

Radio

  • Location of new Radio installation

  • Microphone clip securely fastened

  • Take Photo

  • Radio turns on with Vehicle Accessories

  • Photo of the installed radio showing location in vehicle

Coax Cable & Antennas

  • Location of VHF Antenna

  • Type of Antenna Bracket Used

  • Forward power (watts)

  • Reflected power (watts)

  • Type of Unify Antenna

  • Location of Unify Antenna

  • Type of Antenna Bracket Used

  • Location of Cellular Antenna

  • Location of Wi-Fi Antenna

  • Confirm Radio has both Cellular & Wi-Fi Connectivity

  • Cellular IP Address

  • Wi-Fi IP Address

  • ALL RF Connectors fitted correctly & stress tested

  • Photos of all installed Antennas showing location on vehicle

GPS

  • GPS antenna installed

  • GPS signal acquired

  • Photo of installed GPS Antenna showing location on vehicle

POST INSTALLATION VEHICLE CHECK

  • Re-test Dashboard Instrument Cluster for any warnings

  • Re-test Heater & Air Conditioner

  • Re-test Windscreen Wipers

  • Re-test Left / Right turn indicators

  • Re-test Brake & Tail Lights

  • Re-test Vehicle Horn

  • Re-test Headlights

  • Check all cable ties are cut & that there no sharp edges/corners

  • Check that all exposed cables are protected with split tube

  • Check that all external penetrations have been protected against water ingress

  • Check that all cabin trim has been restored

  • Check that the cabin interior is clean and all install consumables have been removed

INSTALLER ACCEPTANCE

  • I confirm that the installation information provided in this checklist is accurate on the date specified and there are no outstanding issues.

  • Installer's Name & Signature:

  • As an authorised representative of City of Wangaratta, I confirm that the installation information provided in this checklist is accurate on the date specified and I am satisfied with the installation.

  • City of Wangaratta Name & Signature:

  • General Installation Notes

  • Did you have any assistance with this install from another installer?

  • Approx how much?

  • Installation End Time

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.