Audit

Electrical Installation Condition Report

RCDs provided for additional protection which includes RCBOs

RCDs provided for protection against fire which includes RCBOs

Manual operation of circuit-breakers and RCDs to prove disconnection

Presence of RCD retest notice at or near equipment where required

Presence of diagrams, charts or schedules at or near equipment where required

Presence of non-standard (mixed) cable color warning notice at or near equipment where required

Presence of alternative supply arrangement warning notices (s) at or near equipment where required

Presence of replacement next inspection recommendation label

Presence of another required labeling

Examination of protective device and base; correct type and rating (no signs of unacceptable thermal damage, arcing or overheating)

Protection against mechanical damage where cables enter equipment

Protection against electromagnetic effects where cables enter metallic enclosures

Distributional circuits

Identification of conductors

Cables correctly supported throughout their length

Condition of insulation of live parts

Non-sheathed cables protected by enclosure in conduct, duct or trunking

Suitability of containment systems for continued use (including flexible conduct)

Cables correctly terminated in enclosures

Distribution/final circuits

Non-sheathed cables protected by enclosure in conduit, duct or trunking

Suitability of containment systems for continued use (including flexible conduit)

Cables correctly terminated in enclosures

Examination of cables for signs of unacceptable thermal and mechanical damage/deterioration

Adequacy of cables for current-carrying capacity with regard to the type and nature of the installation

Adequacy of protective devices; type and rated current for fault protection

Presence and adequacy of circuit protective conductors

Co-ordination between conductors and overload protective devices

Cable installation methods/practices appropriate to the type and nature of installation and external influences

Cables where exposed to direct sunlight, of a suitable type

Concealed cables installed in prescribed zones

Concealed cables incorporating earthed armor or sheath, or run within the earthed writing system, or otherwise protected against mechanical damage caused by nails, screws and the like where not in prescribed zones

Provision of additional protection for cables concealed in walls or partitions

Provision of fire barriers, sealing arrangements and protection against thermal effects

Band II cables segregated/separated from non-electrical services

General condition of wiring systems

Temperature rating of cable insulation

Condition of accessories including socket-outlets, switches, and joint boxes

Suitability of accessories for external influences

Completion
Full Name and Signature of Authorized Person