Title Page

  • Site conducted

  • Customer

  • FEC #

  • Truck Unit Number

  • Date

  • Prepared by

  • Crane SN

  • Model #

  • Tire Positioner SN

  • Model #

  • Location

ITEM

  • 1. Check control levers to make sure all operate smoothly.

  • 2. Check crane hook, mounting bolt, and safety latch.

  • 3. Check crane hose routing and fittings for leaks or damage.

  • 4. Check hydraulic oil in crane tank and check for leaks.

  • 5. Check hydraulic pressure to make sure pump is operating to specifications.

  • 6. Check for broken or damaged grease fittings on crane.

  • 7. Check condition of crane (weld cracks and structural damage).

  • 8. Check crane boss main boom to mast.

  • 9. Check crane boss main boom to outer boom.

  • 10. Check crane mounting bolts and nuts.

  • 11. Check safety decal and weight chart make sure all are still on crane.

  • 12. Check all cylinders for leaks.

  • 13. Check bushing wear on all pivot points and cylinder ends.

  • 14. Check pivot link welds and pin condition for any signs of stress.

  • 15. Check pivot pin retaining device (roll pins, snap rings, and bolts.)

  • 16. Check Tire Positioner hoses for wear, leaks, loose fittings, and proper mounting.

  • 17. Check Tire Positioner gear box oil level.

  • 18. Check for broken or damaged grease fittings on Tire Positioner.

SIGN OFF

  • Are there defects need to be corrected for safe operation of crane?

  • Condition of Crane

  • Comments

  • Inspector's Name and Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.