Page 1: Initial questions
-
Conducted on
-
Prepared by
Crane Operator Name:
-
undefined
-
Location
Make/model of Crane
-
undefined
Weather description
-
undefined
Crane Details
-
Is the FLHRA completed
-
Is operator's manual in the cab?
-
Are Load Charts present?
-
Has the Pre-shift Crane inspection been logged by an operator?
-
Fire extinguisher accessible/charged?
-
Is spill kit present?
-
Is annual inspection current?
-
Are audible alarms functioning?
-
Is daily job ticket signed
-
Is the operator's cab clean?
-
Is the crane deck and walking surfaces clean/clear/dry?
-
Are ladders and steps free of debris, defects, and damage?
-
Are there visible leaks
-
Is the Counterweight/Crushing Hazard Warning decal present?
-
Is the Electrocution Hazard Warning decal present?
-
Is the Hand Signals decal present?
-
Is the Outrigger Crushing Hazard Warning decal present?
-
Is the Three-Point of contact warning decal present?
-
Is the Collapsing Boom Hazard decal present?
Crane Setup
-
Is the crane level?
-
Has crane assemble/disassembly form been filled out?
-
Is swing radius properly barricaded?
-
Is jib in use?
-
Is crane working near overhead powerlines?
-
Has the 360 degree work zone been established up to the crane's maximum working radius?
-
Are outriggers fully deployed?
-
Is proper cribbing in use?
-
If set up near an excavation, is proper distance maintained?
-
Are there any visible ground condition hazards?
-
Is any part of the crane , including loadline or load, working within 20 feet of a powerline?
-
If yes, is the crane grounded, and/or 20 foot clearance established?
Lifting Operations
-
Describe Lift
-
Is lift in the blind?
-
Is there a qualified signaller present?
-
What method of communication is being used? (hand, radio, phone, 2-way, other)
-
Is suspended personnel platform being used?
-
What configuration is being used?
-
Radius?
-
Boom angle
-
Parts of line
-
Load weight
-
Lifting with block/ball?
-
How was load weight verified?
Rigging
-
What rigging is being used? Please describe briefly
-
If hooks are being used, are the safety latches present?
-
Was rigging inspected prior to use?
-
Was rigging properly labelled and tagged?
-
Was load rigged by a qualified rigger?
Safety
-
Are had hats worn?
-
Are safety glasses worn?
-
Is high visibility apparel worn?
-
Pre-lift meeting held?
-
Safe work permit required?
-
Is fall protection in use?
-
Are H2S/CO monitors in use?
Page 2: Main checklist