Information
-
DAILY PACK CHECK - CARDUP
DAILY PACK CHECK - CARDUP
-
DATE & TIME
-
PRODUCT
PACK PRESENTATION
-
STRAP TENSION
-
PACK SQUARENESS
-
RETRAX AND LABELING LOCATION
-
CHIPPING IN PACK
-
Action to rectify on Dehacker
DIMENSION CHECK (BRICK & BLOCK DIMENSIONS over 10 units in millimetres)
LENGTH
-
MEASURED LENGTH
-
TARGET LENGTH (of 10 units)
-
LENGTH DIFFERENCE (Measured - Target)
-
LENGTH SPECIFICATION
FACE BRICK (DW2) DIFFERENCE ALLOWED +/- 30mm
FACE BLOCK (DW2) DIFFERENCE ALLOWED +/-35mm
INTERNAL BLOCK (DW1) DIFFERENCE ALLOWED +/-50mm -
IS LENGTH WITHIN SPECIFICATION ?
WIDTH
-
MEASURED WIDTH
-
TARGET WIDTH (of 10 units)
-
WIDTH DIFFERENCE (Measured - Target)
-
WIDTH SPECIFICATION
FACE BRICK (DW2) DIFFERENCE ALLOWED +/- 20mm
FACE BLOCK (DW2) DIFFERENCE ALLOWED +/-20mm
INTERNAL BLOCK (DW1) DIFFERENCE ALLOWED +/-25mm -
IS WIDTH WITHIN SPECIFICATION ?
HEIGHT
-
MEASURED HEIGHT
-
TARGET HEIGHT (of 10 units)
-
HEIGHT DIFFERENCE (Measured - Target)
-
HEIGHT SPECIFICATION
FACE BRICK (DW2) DIFFERENCE ALLOWED +/- 20mm
FACE BLOCK (DW2) DIFFERENCE ALLOWED +/-30mm
INTERNAL BLOCK (DW1) DIFFERENCE ALLOWED +/-45mm -
IS HEIGHT WITHIN SPECIFICATION ?
PRODUCT QUALITY (lay one full leaf)
-
COLOUR GRADE COMPARED TO MASTER
- 4
- 5
- 6
- XV
- XD
- N/A
-
CHIPPING IS LESS THAN 5 CENT PIECE
-
BOWING IS LESS THAN 2MM TOTAL LENGTH OF FACE
-
SQUARENESS - ALL FACES AT 90 DEGREES
-
GLAZE / TEXTURE / ROLLER APPLICATION CONSISTENT WITH MASTER<br>
-
PRODUCT CONSISTENT WITH MASTER - ALL POINTS ABOVE
-
PRODUCT GRADED AS
- TRIAL
- 4
- 5
- 6
- XV
- XU
- XO
- XC
- XD
-
COMMENTS
-
Pack Check Conducted by:
-
Pack Check Conducted by:
-
Pack Check Conducted by:
-
PHOTOS OF PACK CHECK
-
PHOTO OF PRODUCT ON KILN CAR
-
PHOTO OF BLOCK STACK
-
