Title Page
-
Operator Name
-
Name;
-
Conducted on
-
Address
-
Select Plant
- S001 DHZ-78C 2016 Toyotal Hilux SR5
- S002 BR-31-BY 2011 Toyota Hilux
- S004 44516D 2015 Moffet Forklift
- S005 BX-83-PG 2009 Isuzu Hiab
- S006 AE-97-RZ 2005 Hino Single Cab
- S007 - ACT 2011 Komatsu Forklift
- S008 CKJ-65-TK 2011 Hino Crewman
- S009 DYX-19E 2018 Holden Equinox
- S010 DTA-11N 2017 Toyota Hilux
- S012 00994A 2019 Moffet Forklift
- S013 XN-98-QG 2020 Isuzu Flatbed with Moffet
- S014 YJD-39U 2020 Toyota Hilux SR5
- S015 2020 Komatsu Forklift Warehouse
- S016 XN44SX 2020 Isuzu Flat Bed with Moffet
- S017 2020 Komatsu Forklift K24950
- S018 YKH25M 2021 Toyota Hilux
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
KM/Machine Hours
-
Operators are required to check the following items before commencing work. There records form the basis of a plant maintenance procedure and will be subject to random inspections. Keep up to date with machine records at all times.
-
Please make with the following (OK) no obvious defects. (X) Fault Identified - use fault/defect report below. (N/A) Item not applicable to the machine.
-
Pre Start Checks
-
Check oil, water and fluid levels
-
Check oil, water and fluid fork leaks
-
Check fuel level
-
Check battery and connections
-
Check radiator and blow out if required
-
Check condition of pins and arms
-
Check fire extinguisher
-
Wheels, Tyres, Tracks, - Wear/tension/pressure
-
Wheel nuts
-
Damage to panels/guards-cracks to chassis/frame/body
-
Cabin - Access /egress, seating, seat belt, loose objects, controls, Rops or Fops
-
Visibility - Windscreen, windows, wipes, washers, mirrors
-
Compulsory signs, reflective tape, reflectors
-
Check horn is operating
-
After start checks
-
Neutral Start
-
Brake Test; Park brake & Service brake (refer to operating manual in cab)
-
Check steering operation
-
Check all warning devices
-
Check temp gauges
-
Check implement functions
-
Check service and safety control cut off
-
Check machine is safe to use
-
After Shift Checks
-
Ensure all attachments are lowered to ground level
-
Refuel if needed
-
Grease machine
-
Full visual checks over for leaks
-
I have completed safety check as required
-
Details of fault or defects and action taken
-
Fault reported to;
-
Date
-
Fault constitutes safety hazard
-
Does machine require immediate repair?
-
If yes to both park machine up. Contact your WHS Manager or supervisor. The plant needs to be repaired before operation.
-
Email report to operations@builtritescaffolding.com.au
