Information

  • Audit Title

  • Document No.

  • Client / Site

  • Conducted on

  • Prepared by

  • Location
  • Personnel

Electrical Equipment in Hazardous Locations (Flame Proof) Quarterly Inspection

  • AREA

  • Select date

  • 2017

  • Schedule of Checks (Quarterly)

  • Inspector

  • Notes: Do not “tick”. Write Ok or use the code of the specific deviation in the legend. If the Equipment is defective it must be tagged “Defective” and must be reported to the person responsible for the repair of the equipment. If the equipment is beyond repair it must be destroyed and discarded. New equipment to replace the discarded equipment must be obtained to discourage the use of make shift equipment.

  • Equipment ID No.:

  • Type of Equipment:

  • Location:

Inspections

  • Electrical Equipment

  • M1 Equipment has metal cracks or broken glass

  • M2 Cable and cable entries unsafet

  • M3 Portable electrical equipment unsafe

  • M4 Cable armouring not properly earthed

  • M5 Clamps in poor condition

  • M6 Joints in conduit runs and fittings not secured

  • M7 Metal equipment not earthed and certified for use

Classification of Equipment

  • C1 Equipment unsuitable for the specific hazardous locations

  • C2 Illegal modifications or makeshifts repair had been made

  • C3 Equipment sealed according to requirement

  • C4 Total installation of equipment considered unsafe

Inspector Initials and Date

  • Inspector

  • Inspector

  • Date and time

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.