DRB QA Check List

Does the gate type match the order?

Will there be a spare parts inspection going along with is order?

Check cable to spring clearance.

Are the spring jam nuts tightened?

Does the gate have a "tested by" sticker signed?

Is their a custom firmware and border crossing sticker by the tested sticker?

Is the DRB loop sticker on the MGC?

Is the diode jumper correctly installed? (+24V and C1-3)

Has the standard lower jumper been moved to 24V instead of 0V?

Has the (KA)key switch been installed and wired Correctly? (Green to IN4, white to IN6, and brown to 0V)

Is the EM01 installed?

Is the DM02 installed?

Were any extra devices installed?

Are all of the yellow marks correct?

Does the gate have the correct number of springs?

Is the hood gasket installed?

Does the gate have the correct UL sticker?

Does the gate serial number sticker match the box label?

Does the controller have all of the plugs?

Does the color match the order?

Is the gate set up for articulated?

Does it have the correct springs?

Does the gate have any accessories?

Is the flange correct?

Is the Vario grey section included?

Are the u-rails included?

Is the documentation package complete?

Do both doors slide into the channels without binding?