• Check for hydraulic leaks

  • Comments

  • Hydraulic fluid level ( change every 2 years or 8000 hours )

  • Comments

  • Check air filter on the hydraulic reservoir

  • Comments

  • Hydraulic pressure

  • Comments

  • Hydraulic oil temperature

  • Comments

  • Spray lube in pincher jaws

  • Comments

  • Clean and tighten all proximity sensors

  • Comments

  • Check for torch movement

  • Comments

  • Grease all vice and pincher zerk fittings ( do not grease fittings on robot arms )

  • Comments

  • Take all covers off of robot, clean and oil pads in covers

  • Comments

  • Clean all rails in all directions of robot movement

  • Comments

  • Check for snag marks on hose covers

  • Comments

  • Blow off inside of machine

  • Comments

  • Check oil in all gear boxes ( replace every two years )

  • Comments

  • Check chain tension on all chains

  • Comments

  • Check all accessible fasteners

  • Comments

  • Check all cables and hoses for chaffing and wear

  • Comments

  • Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. Any ratings or scores displayed in our Public Library have not been verified by SafetyCulture for accuracy. Users of our platform may provide a rating or score that is incorrect or misleading. You should independently determine whether the template is suitable for your circumstances. You can use our Public Library to search based on criteria such as industry and subject matter. Search results are based on their relevance to your search and other criteria. We may feature checklists based on subject matters we think may be of interest to our customers.