Information
-
Audit Title
-
Client / Site
-
Conducted on
-
Engineer
-
Location
-
Photo Before Service
-
Make
-
Model
-
Serial No
-
Job No
-
Contact Name
-
Take rack read
-
Run machine to check for faults
-
Ask user if any faults
-
Service machine
-
Next PPM due Sticker Fitted
-
ENVIRONMENT
-
Check General Working Condition (Cable's, Hoses etc)
-
Check Water Quality (hardness)
-
Check Water Pressure (static)
-
Check water pressure (dynamic)
-
FUNCTION
-
Check the seals and for loose nuts,bolts and fittings
-
Check Thermostats and Water Temperatures - Wash Tank 60c
-
Check thermostats and water temperatures - Rinse tank 85c
-
Check and clean out wash arms and jets
-
Check and clean out rinse arms and jets
-
Check wash arm rotation
-
Check rinse arm rotation
-
Check and Clean all filters
-
Check condition of fill hoses
-
Check Water fill levels (is machine filling ok)
-
Check Drain (is machine draining ok)
-
Check motor rotation (3 phase machines)
-
For machines fitted with rinse aid injectors, remove tube between wash pump and rinse aid injector and clean out
-
Complete descale (if required)
-
Degrease wash tank area
-
Replace service parts as needed
-
Leave replaced parts in plastic bag for customer
-
FOR RACK MACHINES
-
Are curtains in correct place?
-
Is rack working?
-
Is end stop switch working?
-
SAFETY
-
Check contactors, relays,PCB's and circuit breakers
-
Earth bonding/cross bonding check to 0.1 ohm or less
-
Check Local Isolation switch & mains polarity
-
Check condition of Internal wiring and connections
-
Check safety Features (door switch etc)
-
Setting up
- Set up Detergent
- Set up Rinse Aid
- Set up Sanitizer (if applicable)
-
Ph reading of detergent in wash tank
-
Polish / Clean outside of machine
-
Attach Chemical Tags and pipe stiffeners to pipes
-
Complete Full Working Test at end of service
-
Photo at End of Service
-
Leave Site Clean and tidy
-
Comments
-
Customer to sign on completion
