Title Page

  • Completed On

  • Documented by

  • Firefighters Performing Apparatus Inspection

Apparatus Vehicle Lighting

  • Headlights (High and low beams)

  • Marker Lights

  • Front Turn Signals

  • Rear Turn Signals

  • Brake Lights

  • Reverse Lights

  • Back-up Alarm

  • Rear Step Lights

  • Ground Lights

Apparatus Vehicle Scene Lighting

  • Does the on-board generator start when the in cab switch is activated?

  • Front brow light

  • Driver side 120 volt scene light

  • Driver side 12 volt scene lighting

  • Passenger side 120 volt scene light

  • Passenger side 12 volt scene lighting

  • Rear detachable 120 volt tripod scene lights

  • Light tower

Apparatus Vehicle Emergency Warning Equipment

  • Emergency Lighting in Park

  • Describe location of faulty lighting and supply picture.

  • Emergency Lighting in Drive

  • Describe the location of faulty lighting and supply picture.

  • Electronic Siren

  • Mechanical Siren (Q2)

  • Mechanical Siren Brake

  • Air Horn

  • VHF Radio Check with Steuben County Fire

  • VHF Radio check with South Corning Base on Fire ground 7

Chassis Inspection

  • Air parking brake

  • Chassis horn (not electronic or air)

  • Is the windshield clean?

  • Windshield Wipers

  • Are the wiper blades torn?

  • Washer fluid level

  • Was the washer fluid topped off?

  • Check engine oil with motor off after it has ran for a small amount of time.

  • Engine Oil Level

  • Has the engine oil level been topped off?

  • Power mirrors

  • Are all tires set to 120psi?

  • Did you set all tires to 120psi?

  • On-spot chains

  • Is the truck clean?

Front Bumper

  • Does the 120 volt electric cord reel pull all of the way out?

  • Is the cord clean from dirt and debris?

  • Is the cord free of cuts, nicks or tears?

  • Does the junction box supply power? (Generator has to be running)

  • Does the power rewind work?

  • 100' of 1 3/4" attack line with nozzle

  • 300' of 1" forestry attack line with nozzle

  • Does the hydraulic cord reel pull all of the way out?

  • Is the cord clean of dirt and debris?

  • Is the cord free of cuts, nicks or tears?

  • Does the cord supply power to hydraulic cutting/spreading tools? (Generator and hydraulic pump having to be operating)

  • Does the power rewind work?

Pumping and Pump Panel

  • Are the rear tires chocked?

  • Is the air brake set?

  • Pump PTO

  • Does the transmission engage when the 'D' button is pressed on the transmission pad?

  • Tank to pump switch

  • At this point do not activate any valves other than the 'Tank Refill' valve.

  • Does the 'Mode' button function when pressed to either "Preset" or "Throttle" modes?

  • When in "Throttle" mode, does the engines' RPM accelerate and decelerate when the up and down arrows are pressed?

  • Is the pump pressure gauge reading?

  • With the pump control in "Throttle" mode and at an increased RPM, does the truck go to idle when the 'Idle' button is pressed?

  • Pump primer

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.