Information
-
Document No.
-
Project Title
-
Manufacturer
-
Conducted on
-
Prepared by
-
Location
-
Other Auditors on Site
All Brands
ALA
Specification Accuracy
-
Are EHI and Manufacturer's drawings present at inspection time? (including color artwork)
-
Are dimensions correct? <br>SMALL- 661 wide<br>304mm tall<br>76mm- sign depth from face to wall<br>6mm- letter depth
-
Does sign match the artwork?
-
Are materials used as specified? (3M vinyl, clear face and white poly backing?)
-
Are cabinets and colors correct?
-
Is blackout film used to darken area from poly layer overlap to edge of sign face?
-
Electrical switch as required?
-
Are fasteners (screws) as per specifications?
-
Are screw heads painted to match vinyl?
-
Are electrical feeds in place by specifications?
Thermal Forming
-
Are the edges smooth? (No ripples, rough edges, etc.)
-
Add picture of the edge detail
-
Are the corners smooth and even?
-
Add picture of the corner detail
LEDs and Illumination
-
Are the correct LEDs and amount used per specifications?
-
Are the lighting levels equivalent to the NA Production Sample?
-
Add picture of equal illumination
-
Are the lighting levels even across the face? No hot or dark spots?
-
Are blue LEDs equal in illumination to production sample? (very important that the blue lighting does not overpower other brands)
Letter Lamination and Decoration
-
Are letters clear? (Not foggy, no bubbles)
-
Are letter edges clean and vinyl cut precisely?
-
Is the logo centered on the face?
-
Is "R" centered and straight in ®?
-
Are blue LEDs even and produce no scalloping or shadows?
-
Is the ALA Frame centered and even on all 4 sides?
-
Additional pictures of ALA
ENT
Specification Accuracy
-
Are EHI and Manufacturer's drawings present at inspection time? (including color artwork)
-
Does sign match the artwork?
-
Are dimensions correct? <br>SMALL-<br>1200mm by 304mm acrylic frame<br>1120mm by 224mm face<br>40mm visible frame on all 4 sides<br>82mm deep<br>6mm letters<br>
-
Are materials used as specified? (3M vinyl, white poly face and backer, clear poly letters)
-
Does frame matte finish match production sample?
-
Do corner pucks match finish and size of production sample?
-
Are cabinets and colors correct?
-
Electrical switch as required?
-
Are fasteners (screws) as per specifications?
-
Are screw heads painted to match vinyl?
-
In order to minimize the appearance of the fasteners, metal screws should be countersunk into polycarbonite face. The screw holes should be pre-drilled and bored to prevent cracking if fasteners are over-tightened. Has this been done correctly to minimize potential face cracking at installation?
-
Are electrical feeds in place by specifications?
LEDs and Illumination
-
Are the correct LEDs and amount used per specifications?
-
Is there a noticeable halo on the frame equivalent to the production sample?
-
Are the lighting levels even across the face? No hot or dark spots?
-
Add picture of illumination
-
Are the lighting levels equivalent to the NA Production Sample?
-
Add picture of equal illumination
Letter Lamination and Decoration
-
Are letter edges clean and vinyl cut precisely?
-
Are letters clear? (Not foggy, no bubbles)
-
Is "R" centered and straight in ®?
-
Are the 3 sides of the green letter non-illuminated?
-
Does the green edges have any noticeable bubbles or inconsistencies?
-
The "V-Groove" edges should only be glued in the black areas to minimize any inconsistencies in corners. Is this done correctly?
-
The "e" logo should not wrap over the edge. Is this correct on the prototype?
-
Is there a 3mm or less overlap of green and black vinyl?
-
Additional pictures of ENT
NAT
Specification Accuracy
-
Are EHI and Manufacturer's drawings present at inspection time? (including color artwork)
-
Does sign match the artwork?
-
Are dimensions correct? <br>SMALL<br>1200mm by 224mm overall sign<br>1120mm by 224mm face<br>817mm by 121mm logo<br>82mm deep with 25mm gap at wall<br>7mm gap at edge face and end cap<br>33mm end cap
-
Are materials used as specified? (3M vinyl, clear poly letters and white poly face)
-
Is break-formed edge smooth and clean? (no bubbles or rough edges)
-
Does end-cap match curve dimensions of production sample?
-
Are cabinets and colors correct?
-
Electrical switch as required?
-
Are electrical feeds in place by specifications?
-
Are fasteners (screws) as per specifications?
-
Are screw heads painted to match vinyl?
-
In order to minimize the appearance of the fasteners, metal screws should be countersunk into polycarbonite face. The screw holes should be pre-drilled and bored to prevent cracking if fasteners are over-tightened. Has this been done correctly to minimize potential face cracking at installation?
LEDs and Illumination
-
Are the correct LEDs and amount used per specifications?
-
Are the lighting levels even across the face? No hot or dark spots?
-
Add picture of illumination
-
Are the lighting levels equivalent to the NA Production Sample?
-
Add picture of equal illumination
-
Is there a noticeable halo effect from the back of the sign?
Letter Lamination and Decoration
-
Are letter edges clean and vinyl cut precisely?
-
Are letters clear? (Not foggy, no bubbles)
-
Is "R" centered and straight in ®?
-
Is blackout film used on the back edges of the sign per specification?
-
Additional pictures of NAT