Title Page

  • Conducted on

  • Person Being Assessed

  • Site

  • Rig I.D

SAFETY AND EMERGENCY EQUIPMENT

  • Demonstrates the location of the emergency contact list?

  • Demonstrates the location of the emergency response plan?

  • Demonstrates the location of fire extinguishers and fire suppression systems, on all equipment? Demonstrate how to activate

  • Demonstrates the location of emergency stops on all equipment? Demonstrate how to activate

  • Demonstrates the location of first aid kits?

  • Demonstrates the location and use of a two way radio including hand held devices?

  • Demonstrates the location and use of satellite phones if in use?

  • Demonstrates the location and use of a fall arrest harness?

SAFETY AND PROCEDURES

  • Demonstrates turning the isolator on and off? (drill rig, support vehicles, ancillary)

  • Demonstrates isolating the drill as per company and site isolation<br>procedures?

  • Demonstrates the use of out of service and danger tags?

  • Understands that danger tags can only be removed by the person who’s name is on the tag?

  • Understands that out of service tags can only be removed by a competent person after the repair / maintenance has been completed?

  • Understands that disciplinary action may take place should there be a breach of the site isolation procedures?

PRE-START CHECK (DRILL RIGS)

  • Checks for out of service/danger/information/testing and commissioning tags?

  • Completes prestart check from prestart form on tablet?

  • Understands how and where to report any issues picked up on inspection?

  • Understands that all defects must be noted and reported to the supervisor?

  • Can determine difference between a ‘minor’ and ‘major’ fault on pre start?

  • Demonstrates checking and refilling of engine oil?

  • Demonstrates checking and refilling of radiator tank?

  • Demonstrates checking and refilling of hydraulic oil tank?

  • Demonstrates checking and refilling of the compressor oil tank?

  • Demonstrates checking of pre cleaners / air filters for engine and compressor?

  • Demonstrates checking all oil filters for leaks?

  • Demonstrates checking all fuel filters for leaks?

  • Demonstrates activating the emergency stops?

  • Demonstrates resetting the emergency stops?

  • Demonstrates the location of all emergency stops?

  • Demonstrates the use of all work lights?

  • Demonstrates inspecting machine for any cracks?

  • Demonstrates inspecting the mast and pivot pins?

MAINTENANCE ITEMS (DRILL RIG)

  • Demonstrates daily and weekly grease?

  • Demonstrates check and lightly clean air filters and dust traps?

  • Demonstrates draining moisture from air tanks?

  • Demonstrates lubricating chains?

  • Explain the danger with undoing hydraulic hoses directly from a ram that is suspending a weight?

OPERATING THE ROD LOADER

  • Demonstrate safely loading a rod into the rod loader cup and bring into alignment with the mast?

  • Demonstrate safely loading a rod into the drill string?

  • Demonstrate safely removing a rod from the drill string?

  • Demonstrate safely unloading a rod into the rod storage bin?

  • Demonstrate safely loading and unloading a rod from the support truck?

  • Understands the safe use and function of the mercury switch?

  • Can explain the various points that you could damage the rig or the rod loader with its hydraulics?

  • Can explain the possible drop zone of a loaded rod?

  • Can explain common faults or wear points of the rod loader to monitor?

  • Can explain how to adjust the tension of the rod loader jaws?

SAMPLING AND CYCLONE DUTIES (RC)

  • Can explain the importance of neat and tidy sampling to the clients specifications?

  • Can explain why geologists prefer dry samples?

  • Demonstrate how to correctly clean the splitter?

  • Can Explain what the purpose of a duplicate sample is and how to ensure the samples are even?

  • Demonstrate unblocking a cyclone?

  • Demonstrate cleaning the cyclone and splitter from top to bottom?

  • Can explain sample contamination?

  • Can explain why a splitter/cyclone needs to be level?

WATER WELL SPECIFIC TASKS (HYDROGEOLOGICAL DRILLING)

  • Can demonstrate procedure for Add/Remove Bottom Hole Assembly?

  • Can demonstrate procedure for gravel packing hole?

  • Can demonstrate procedure for mud rotary drilling?

  • Can demonstrate procedure for installing steel casing?

  • Can demonstrate procedure for running pvc casing?

  • Can demonstrate procedure for preparing steel casing?

  • Can demonstrate procedure for Set up of Mud Pump and Pits for Drilling with Mud?

  • Can demonstrate procedure for mixing drilling fluids?

  • Can demonstrate procedure for running steel casing?

  • Can demonstrate procedure for VWP Installation?

  • Can demonstrate procedure for mixing grout with a cement mixer?

  • Can demonstrate procedure for constructing headworks?

  • Can demonstrate procedure for operation of hydraulic breakout machine?

  • Can demonstrate procedure for air lifting?

OFF-SIDER SIGN OFF

  • I acknowledge I have been shown and understand the induction given to me and have been trained to become a competent offsider

  • I have read and understood the related Safe Work Procedures and will adhere to their content in the safe operation of all plant and machinery on site.

  • Offsider Signature

SUPERVISOR SIGN OFF

  • I have inducted the Trainee and am satisfied the trainee is competent to perform offsider duties on this machine.

  • Supervisor Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.