Electric Results Safety Inspection Industrial

• Conducted on

  Date

• Prepared by

• Select date

  Date

• Customers Name

• Site Address

• Meter Location

• Consumers Mains Size (mm sq)

  Select 4mm sq 6mm sq 10mm sq 16mm sq 25mm sq 35mm sq 50mm sq 70mm sq 95mm sq 120mm sq

  • 4mm sq
  • 6mm sq
  • 10mm sq
  • 16mm sq
  • 25mm sq
  • 35mm sq
  • 50mm sq
  • 70mm sq
  • 95mm sq
  • 120mm sq

• Number of Phases in Consumers Mains

  1

  2

  3

• Sub-Board Location

• Sub-Mains Size (mm sq)

  Select 4mm sq 6mm sq 10mm sq 16mm sq 25mm sq 35mm sq 50mm sq 70mm sq 95mm sq 120mm sq

  • 4mm sq
  • 6mm sq
  • 10mm sq
  • 16mm sq
  • 25mm sq
  • 35mm sq
  • 50mm sq
  • 70mm sq
  • 95mm sq
  • 120mm sq

• Number of Phases in Sub-Mains

  1

  2

  3

• Type of Premises

  Single domestic

  Multi domestic

  Unit/apartment

  Commercial

• Number of Stories

  1

  2

  3

  4

  5

undefined

• Main switch fitted

  Yes

  No

  N/A

• Verify the operation of RCDs to ensure they trip within the specified time.

  Yes

  No

  N/A

• Performed metered test on RCD's and Record results

  Yes

  No

  N/A

• No trip

  Pass

  Fail

undefined

• Surge diverter fitted

  Yes

  No

  N/A

• Surge diverter condition

  Pass

  Fail

• Number of smoke detectors fitted

  Select 0 1 2 3 4 5 6 7 9 10 11

  • 0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 9
  • 10
  • 11

• All smoke detectors tested and functioning

  Yes

  No

  N/A

• Location of smoke detectors that failed test

• Emergency lights fitted

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Test emergency lighting systems to ensure proper operation during power outages.

  Select Pass Fail

  • Pass
  • Fail

• Visual inspection of switch board wiring

  Yes

  No

  N/A

• Visual inspection of switch board labels

  Yes

  No

  N/A

• Use thermal imaging cameras to identify hotspots or abnormal temperature rises.

  Good

  Fair

  Poor

  N/A

• Check that circuit breaker/fuse rating is correct for the size of cable

  Yes

  No

  N/A

• Check kA rating of circuit breakers comply with standards (minimum 6kA)

  Yes

  No

  N/A

• Visually inspect wiring system and document condition

• Is there an earth at each lighting point

  Yes

  No

  N/A

• Is polarity correct for all power points

  Yes

  No

  N/A

• Is earthing correct for all power points

  Yes

  No

  N/A

• Record result of main earth cable resistance test

• Earth stake location

• Is earth stake protected against corrosion e.g painted

  Yes

  No

  N/A

• Test earthing system and record results (FLI equal or less than 1.2 ohms)

undefined

• COMMENTS/RECOMMENATIONS:

• Add signature

  Sign