ELECTRICAL TESTING - CAPSTONE

• Site conducted

  Select

• Simpro Job Number

• Add location
  Address

• Conducted on

  Date

• Prepared by

• Reported Faults/Reason for Testing

General

• Risk Assessment completed.

  Yes

  No

  N/A

• Test instruments operation verified.

  Yes

  No

  N/A

• Person in control advised of testing to be undertaken.

  Yes

  No

  N/A

• Type of installation

  Select Domestic Commercial Industrial

  • Domestic
  • Commercial
  • Industrial

• Is the installation/board energised. (Apply PPE - test for dead)

  Yes

  No

• Circuit(s) to be tested have been isolated, locked out and tagged. (Photo)

  Yes

  No

Main Switchboard

• Visual inspection conducted. Note earthing, cable entry points, markings and labels, location of main earth rod, holes, pole fillers, cables on hinged escutcheon panel

  Yes

  No

  N/A

• MEN connection intact (resistance value)

  Yes

  No

  N/A

Consumers Mains

• Are the consumer mains being tested/verified.

  Yes

  No

• REMOVE M.E.N & MAIN NEUTRAL CONNECTION!

• Size of consumer mains.

  Select 4mm 6mm 10mm 16mm 25mm 35mm 50mm Other

  • 4mm
  • 6mm
  • 10mm
  • 16mm
  • 25mm
  • 35mm
  • 50mm
  • Other

• undefined

• Number of Phases.

  1

  2

  3

• Insulation resistance.

  Compliant

  Not Compliant

  Not Tested

• Polarity

  Compliant

  Not Compliant

  Not Tested

• Neutral integrity

  Verified

  Not Compliant

  Not Tested

• If the installation has been initially energised, it is assumed that the consumer mains have been inspected, tested and verified by the distribution entity,

Main and equipotential earthing

• Main earthing conductor continuity. Ohm value

  Compliant

  Not Compliant

  Not Tested

• (Should be less than or equal to 0.5 Ohm)

• Bonding conductor continuity. Ohm value

  Compliant

  Not Compliant

  Not Tested

• (Should be less than or equal to 0.5 Ohm)

• Earthing of metallic switchboard surrounds. Ohm value

  Compliant

  Not Compliant

  Not Tested

• (Should be less than or equal to 0.5 Ohm)

Circuit Testing

Circuit

• Circuit Description

  Select Lighting1 Lighting2 Power1 Power2 Hot Water Range Oven Air Conditioning1 Air Conditioning2 Pool Submain Other

  • Lighting1
  • Lighting2
  • Power1
  • Power2
  • Hot Water
  • Range
  • Oven
  • Air Conditioning1
  • Air Conditioning2
  • Pool
  • Submain
  • Other

• Details.

• Sub-main is supplying.

• Breaker Number

  Yes

  No

  N/A

• Neutral number

  Yes

  No

  N/A

• Circuit Protection Details

  Select Circuit Breaker MCB/RCD HRC Fuses Rewirable Fuses

  • Circuit Breaker
  • MCB/RCD
  • HRC Fuses
  • Rewirable Fuses

• RCD trip current. Rated mA Value.

  Select 30mA 10mA

  • 30mA
  • 10mA

• Circuit protection size. Amp value.

  Select 10A 16A 20A 25A 32A 40A 50A 63A 80A Other

  • 10A
  • 16A
  • 20A
  • 25A
  • 32A
  • 40A
  • 50A
  • 63A
  • 80A
  • Other

• undefined

• Active conductor size. mm2

  Select 1mm 1.5mm 2.5mm 4mm 6mm 10mm 16mm

  • 1mm
  • 1.5mm
  • 2.5mm
  • 4mm
  • 6mm
  • 10mm
  • 16mm

• Earth conductor size. mm2

  Select 1mm 1.5mm 2.5mm 4mm 6mm 10mm 16mm

  • 1mm
  • 1.5mm
  • 2.5mm
  • 4mm
  • 6mm
  • 10mm
  • 16mm

• Visual inspection.

  Compliant

  Not Compliant

  Not Tested

• Active continuity. Rph Ohm value. AS3000 table 8.2

  Compliant

  Not Compliant

  Not Tested

• Earth continuity. Re Ohm value. AS3000 table 8.2

  Compliant

  Not Compliant

  Not Tested

• Insulation resistance Active to earth. MegaOhm value.

  Compliant

  Not Compliant

  Not Tested

• (Should be greater than 1Megohm)

• Insulation resistance Neutral to earth. MegaOhm value

  Compliant

  Not Compliant

  Not Tested

• (Should be greater than 1Megohm)

• Short circuit A to N. Ohm value

  Compliant

  Not Compliant

  Not Tested

• Polarity test Active(s).

  Compliant

  Not Compliant

  Not Tested

• Polarity test Neutral.

  Compliant

  Not Compliant

  Not Tested

• Interconnection between circuits.

  Compliant

  Not Compliant

  Not Tested

• Fault loop impedence measured ohm value

  Compliant

  Not Compliant

  Not Tested

• RCD operation. mA measured trip.

  Compliant

  Not Compliant

  Not Tested

Exit Checks.

• Main Earth in correct position (Resistance Value)

  Yes

  No

  N/A

• Main Neutral screwed in correct position

  Yes

  No

  N/A

• MEN connection intact (Ohm Value)

  Yes

  No

  N/A

• Evidence of MEN connection

  Media

• Main switch and circuit protection devices returned to original state. Lockouts removed.

  Yes

  No

  N/A

• Evidence that all switchboard covers have been replaced & fixed into position & lockout devices removed

  Media

• Covers, access panels, etc. replaced.

  Yes

  No

  N/A

DISCLAIMER

• Only the circuits or part of the circuits described in this report have been verified. This report does not provide assurance that all electrical equipment in the installation has been verified.

• Inspector

  Sign