Information
-
Encore Site Safety Audit
-
Job Name
-
Project Manager
-
Supervisor/Site Superintendent
-
General Contactor
-
Conducted on
-
Person Performing Audit
General Safety Information
-
Is there a job site labor poster on site?
-
Is there a health and safety manual on site?
-
Are weekly safety meeting being conducted and maintained on site?
-
Are there first aid Kits and trained employees on site?
Fire Safety
-
Fire Extinguishers < 100 Feet from all work locations?
-
Extinguisher at stairwells?
-
Employees trained on fire extinguishers?
-
Extinguishers at all welding or cutting locations?
-
LPG bottles stored at least 6 feet away from heaters?
-
Flammable materials stored correctly
-
Heaters 10 feet away from combustible materials?
Hand Tool Use
-
Are employees trained on the proper use of hand tools and equipment?
-
Are damaged tools tagged out?
-
Are tools in good working order?
House Keeping
-
Is there adequate temporary lighting on site?
-
Are means of egress into and out of the structure or site clear?
-
Are there slipping and tripping hazards?
-
Are work areas being kept clear of trash, materials, scrap and debris?
Ladder Safety
-
Are ladders being used properly?
-
Are extension ladders setup on a 4:1 ratio?
-
Do extension ladders extend 3 feet above the roof, landing or floor being accessed?
-
Are ladders being inspected?
-
Are ladders with defects being removed from service or tagged?
-
Are employees trained on ladders?
Material Handing
-
Are materials and storage areas/connexes organized?
-
Are materials being moved correctly?
-
Are forklifts used on site and are operators certified?
-
Are materials moved safely?
-
Are proper lifting techniques being used for lifting materials?
Personal Protective Equipment (PPE)
-
Are hardhats worn and used 100% of the time?
-
Are safety glassed used 100% of the time?
-
Are gloves be worn when required?
-
Are employees wearing the appropriate footwear? (Leather work boots over the ankle)
-
Is hearing protection available on site?
-
Is there are flash equipment on site if appropriate?
-
Are insulated gloves current on testing if appropriate?
-
Are respirators used?
-
Have employees been medically examined, trained, and fitted for all required respirator use?
-
Have employees signed an appendix D letter for voluntary use of respirators?
Powder Actuated Tools
-
Are powder actuated tools used?
-
Do employees have their card with them during use?
-
Are signs posted indicating powder actuated tools are being used?
-
Are employees using the tool properly with the appropriate PPE. (IE face shield. hearing protection, gloves)
-
Are employees announcing a warning before firing the tool?
Scaffolding
-
Is there a competent person available for inspections?
-
Has the safety department inspected the installation of the scaffolding?
-
Is fall protection used at 6 feet? (IE Guardrails or Personal Fall Arrest System)
-
Is the scaffolding setup on a firm foundation?
-
Is the scaffolding fully planked with no opening greater the 2 inches?
-
Are scissor lifts used and have employees been trained on there use? (Toolbox talk is sufficient if done correctly.)
-
Are adjustable boom lifts used and have employees been trained on there use? (Toolbox talk is sufficient if done correctly.)
-
Are employees using a personal fall protection system in articulating boom lifts and scissor. (Harness are only required in scissor lifts if the customer requires there use.)
Focus 4 Main Hazards
Caught In Hazards
-
Are guards in place on Tools and Equipment
-
Do pathways have clear access and egress?
-
Will confined spaces be entered? (If the answer is yes complete confined space permit in heath and safety manual.)
Struck By Hazards
-
Are reflective vest worn by all employees?
-
Are materials being stored windsafe?
-
Are areas protective from overhead hazards? (Toe boards or falling object protection where appropriate).
Electrical Harzards
-
Has the company's assured grounding program been implemented?
-
Are weekly GFCI test being conducted?
-
Are electrical danger signs on all electrical rooms and any where an electrical hazard exist?
-
Is there lockout/tagout equipment available on site?
-
Are temporary lights on a dedicated circuit?
-
Are temporary lights properly supported?
-
Are all tools and equipment grounded?
Fall Hazards
-
Are handrails on all stairwells?
-
Are there guardrails or adequate floor covers on all floor openings? (A floor whole is considered any opening greater that 2 inches).
-
Are guardrails on open sided edges, walls, windows, roof edges over 6 feet?
-
Are employees using personal fall arrest systems (PFAS)? (Fall Protection Harness, Lanyard and Anchoring Device).
-
Have employees been trained on the use of PFAS?
-
Are anchorage points capable of supporting 5000 pounds?
-
Have PSAS been inspected?
Notes and Corrective Actions:
-
Please list any problems that were not corrected during the audit:
-
Signature of Person Performing Audit
-
Site Supervisors Signature