Information
-
Document No.
-
Audit Title
-
Conducted on
-
Mileage
-
Prepared by
-
Location
-
Personnel
Engineer Seat
-
Start engine and run for 10 minutes minimum
-
Start generator and run for 10 minutes minimum
-
Does electronic siren work?
-
Does Que work?
-
Does air horn work?
-
Are all the gauges working?
Crew Cab
-
All interior lights function?
-
4 gas monitor working?
-
Thermal imager working?
-
All flashlights working?
SCBA
-
Pack E2-A
-
Cylinder pressure at least 4000psi?
-
Straps fully extended and in good condition?
-
PASS working?
-
Replace batteries as soon as possible
-
Battery level is satisfactory
-
Good to go
-
Pack E2-B
-
Cylinder pressure at least 4000psi?
-
Straps fully extended and in good condition?
-
PASS working?
-
Replace batteries as soon as possible
-
Battery level is satisfactory
-
Good to go
-
Pack E2-C
-
Cylinder pressure at least 4000psi?
-
Straps fully extended and in good condition?
-
PASS working?
-
Replace batteries as soon as possible
-
Battery level is satisfactory
-
Good to go
-
Pack E2-D
-
Cylinder pressure at least 4000psi?
-
Straps fully extended and in good condition?
-
PASS working?
-
Replace batteries as soon as possible
-
Battery level is satisfactory
-
Good to go
-
Pack E2-E
-
Cylinder pressure at least 4000psi?
-
Straps fully extended and in good condition?
-
PASS working?
-
Replace batteries as soon as possible
-
Battery level is satisfactory
-
Good to go
-
Pack E2-F
-
Cylinder pressure at least 4000psi?
-
Straps fully extended and in good condition?
-
PASS working?
-
Replace batteries as soon as possible
-
Battery level is satisfactory
-
Good to go
-
Pack E2-G
-
Cylinder pressure at least 4000psi?
-
Straps fully extended and in good condition?
-
PASS working?
-
Replace batteries as soon as possible
-
Battery level is satisfactory
-
Good to go
-
All spare bottles at 4000psi minimum?
RIT Pack
-
Cylinder pressure at least 4000 PSI?
-
Check all connections and mask
-
Switch out flashlight with one from in the cab.
Fluids
-
Fill immediately!
-
Fill as soon as possible
-
Fill after next run
-
Monitor after next run and fill if below 3/4
-
Fill with non-oxygenated gas from cans in the back room or take to gas station
-
Fill with non-oxygenated gas from cans in the back room or take to gas station
-
Top off after next use with non-oxygenated gas
-
Level good
Pump
-
Engage pump
-
Operate primer pump
-
Water tank full?
-
Gauges all functioning?
Lighting
-
All strobe lights functioning?
-
Directional light bar working on all settings?
-
Scene lighting working?
-
Portable generator light working?
Small tools
-
Rotate battery in DeWalt tool set
-
Check fuel and bar oil level in vent saw
-
Run vent saw for 10 minutes
-
Run vent fan
-
Fan work through all RPM's?
Miscellaneous items
-
Floor dry containers full?
-
Fridge full of water?
-
Hose lays all secured?
-
All radios in the charger and on proper channel?
-
Visually check all compartments to ensure hand tools are in their proper location.
Additional comments
-
Add signature