Excel Boat Co Finished Boat Quality Inspection Tennessee - BAY PRO

where any item(s) backordered

Check work order and invoice

Do tires have all lug nuts installed, center caps with plastic center inserts

Screw condition (check to make sure screws are tight and heads are not stripped)

Check to make sure all breakers are operational

All wires zip tied

All zip ties trimmed flush

Bilge pump operational

Recirculating switches working

Navigation lights operational

Aerator operational

Horn operational

Radio Operational

Motor trim operational (3 switches)

Trim gauge working correctly

Hydraulic jack plate operational

Depth finder operational (take pics of depth finder, box, and serial number)

Are LED lights working correctly (verify correct color)

12 volt

Capacity plate correct per invoice

Serial number plate verified and welded correctly, trailer SN, and motor SN (if applicable)

Hidden serial number in place

Verify fuel primer bulb is installed correctly

Rub rail installed, trimmed, and silicone sealed

Flat trim installed

Steering wheel mounting inspected (make sure key is secured with tape)

Grab rail and grab rail knobs installed

Fill front boxes (cooler and box on front deck) to verify they drain correctly

Bow eye condition

Is bow strap tight and chain attached (if applicable)

Are scuff plates installed

Are ratcheting tie down straps working correctly

Pre-rig correct (see invoice)

Checked trailer components per invoice (verify brake lights are not broke)

Checked hydraulic steering - hooked up properly (install steering wheel and verify)

Motor wire grommet secured to be back of boat

Console number installed

Excel decal installed on side of boat

Keys for compression locks in owners bag

Trapezoid on console

Paint quality

Weld quality

Carpet installation quality

Finish quality

Component straightness

Windshield condition

Electrical component straightness

Decal straightness

Foam quality (panel warping or under fill)

Cleanliness

Touch-up and finish

Navigation lights installed

Boat plugs installed

Trolling motor plug installed (verify remote control is with paperwork if it is supposed to have one)

Trolling motor installed (take pic of serial number)

Tempress seats installed

Seat poles installed

Motor owner’s manual and accessories

Hydraulic fluid

Hydraulic steering cylinder installed

Steering wheel installed

Windshield installed

Grab rail installed

Charger installed

Helm pad installed

Sea deck installed (make sure no corners are peeling up)

Transom saver installed

Tackle box trays installed

Excel motor plate installed

Millennium mesh seats

Centric seats

Cooler / type