Title Page
-
Prepared by
-
Conducted on
-
Location of Inspection
-
Fence Panel / Barrier Inspection
-
What type of fence/barriers do you have on site?
- Heras Fencing
- RB1000
- RB2000
- Slot Barrier
- Other
-
-
What condition are the Heras fence panels in?
-
Are all Heras fence panels double clipped?
-
Are all feet secured in rubber base?
-
Is there sufficient ballast weight added to ensure manufacturers compliance?
-
Add correctly weighted ballast block immediately
-
Is additional bracing required?
-
Add additional bracing provisions immediately.
-
Are there any sheeting or signage that could present an additional wind load to the fence panel?
-
Is there sufficient support to ensure that the additional sheeting or signage doesn't present an additional risk?
-
Either add additional support (bracing, water/sand, blocks) or remove sheeting and/or signage immediately.
-
-
What condition are the RB1000 barriers in?
-
Are there additional mesh panels on top of the RB1000 barriers?
-
Are these mesh panels double clipped?
-
Is there any additional sheeting or signage that could present a wind load risk?
-
Is there sufficient support to ensure that the additional sheeting or signage doesn't present an additional risk?
-
Either add additional support (bracing, water/sand, blocks) or remove sheeting and/or signage immediately.
-
Are all RB1000 barriers properly connected?
-
Connect all barriers immediately.
-
Is there sufficient water in each RB1000 barrier to ensure compliance with manufacturers instructions?
-
Add sufficient amount of water immediately.
-
-
What condition are the RB2000 barriers in?
-
Are there additional mesh panels on top of the RB2000 barriers?
-
Are these mesh panels double clipped?
-
Is there any additional sheeting or signage that could present a wind load risk?
-
Is there sufficient support to ensure that the additional sheeting or signage doesn't present an additional risk?
-
Either add additional support (bracing, water/sand, blocks) or remove sheeting and/or signage immediately.
-
Are all RB2000 barriers properly connected?
-
Connect all barriers immediately.
-
Is there sufficient water in each RB2000 barrier to ensure compliance with manufacturers instructions?
-
Add sufficient amount of water immediately.
-
-
What condition are the slot barrier panels/bases in?
-
Are all slot barrier panels/bases secured together?
-
Are there any sheeting or signage that could present an additional wind load to the slot barrier?
-
Is there sufficient support to ensure that the additional sheeting or signage doesn't present an additional risk?
-
Either add additional support (bracing, water/sand, blocks) or remove sheeting and/or signage immediately.
-
Do all bases on each slot barrier have sufficient water in to ensure compliance with manufacturers instructions?
-
Add sufficient amount of water immediately.
-
Are all slot barrier panels double clipped?
-
Double clip all barriers immediately.
-
What other type of fence/barrier do you have on site?
-
Please add photo of other type of fence/barrier
-
If water is required, is there a sufficient amount to comply with manufacturers instructions?
-
Add sufficient amount of water immediately.
-
Are all panels/barriers secure?
-
Follow Manufacturers instructions and ensure they're adequately secured immediately.
-
Are all fences / barriers covered under the temporary works procedure & reguster?
-
Speak to the Temporary Works Supervisor and/or coordinator that is responsible for these provisions immediately.
Summary
-
In your professional opinion, is the fencing / barrier set up sufficient for the weather conditions that are currently present on site?
-
Have you made your concerns heard to the relevant personnel?
-
Please speak to your immediate manager/supervisor and the Temporary Works Supervisor / coordinator immediately.
-
Who have you informed about your concerns with regards to the safety of the site perimeter fencing/barriers?
-
Have they acknowledged your concerns and acted upon them?
-
What else has been done to ensure the safety of operatives on site and pedestrians who are passing the site?
-
I confirm that at the time of carrying out this inspection, that all fence panels, barriers etc. that are present to secure the perimeter of the site, are secure and fit for purpose
-
Signed
