Information

  • Document No.

  • Audit Title

  • Client / Site

  • Conducted on

  • Prepared by

  • Location
  • Personnel

VEHICLE AND PWC ODOMETER/HOUR READINGS - START OF DAY

  • PWC - 1 (FB)

  • PWC - 2 (NON-FB)

  • VOLVO XC90

  • BMW 323i

PACKING OF VEHICLE

  • Flyboard equipment

  • Fuels and Lubricants

  • Helmets, PFD's, Go Pro (charged)

  • Communication Devices including back ups (charged)

  • First Aid Kit

  • Gazebo & Flags

  • Chairs

  • Eski with Drinks & ice

  • Laptop & speakers

  • Check lights on trailer & secured to vehicle

  • Check tyres & condition/inflation

  • Check/test PWC battery power & fuel levels

  • Check weather report for conditions - Port River free from heavy rain 3 days prior? Other: Tide, wind, wave heights?

ARRIVAL ONSITE

  • Check for any new hazards - glass, needles, rocks etc. Observe safety signage and review JSA's for location operating. Ensure public in area aware of operations

  • Set up gazebo and adequately secure to ground

  • Store any excess fuels or liquids under gazebo, first aid kit in close proximity & eski out of direct sunlight.

  • Secure vehicle in safe location out of the way.

SET UP OF EQUIPMENT & CHECKING OF EQUIPMENT

  • Flyboard boots are in good condition and safely secured to board?

  • Rotating flyboard connections swivel freely and are lubricated?

  • No dents or damage to exhaust system or connections?

  • No rips, tears, holes or signs of weakness in hose?

  • Jet ski keys in console prior to launch, bung plugs in?

  • Helmets in good, safe condition?

  • PFD's in good, safe working condition?

SCOPING OF WATERWAY & TESTING OF RESCUE VESSEL

  • Take rescue vessel to scope waterway for hazards / marine life & report any new hazards to Jared.

JET SKI & FLYBOARD PRE-OP CHECKS

  • Connect flyboard to PWC and check water flow on shore?

PACK UP OF EQUIPMENT & PWC's

  • Remove bung plugs & place keys in secure location, Tie down ski's to trailer and ensure all locks/bolts are secured. Place all on-shore equipment into vehicle & empty ice from eski

SITE CLEAN UP

  • Ensure no rubbish or litter left at location of operation

  • Ensure no oils, lubricants or other spillage present

  • Inspect the area so no objects/materials left behind

  • Report any damage or hazards to Council / Authority

MAINTENACE OF EQUIPMENT / VISUAL INSPECTION

  • Check and rinse all flyboard equipment in fresh water

  • Flush PWC's with fresh water

  • Lubricate all swivel / rotating flyboard equipment then dry and store in dark place

  • Inspect trailer for any signs of damage or wear and tear

  • Check and restock first aid kit if necessary

VEHICLE AND PWC ODOMETER/HOUR READINGS - END OF DAY

  • PWC - 1 (FB)

  • PWC - 2 (NON-FB)

  • Volvo XC90

  • BMW 323i

  • Add signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.