Title Page
-
This permit is valid only for the time, work, tools, equipment, and personnel listed.
-
Permit Number
-
Date and Time Prepared
-
Name of Contractor
-
Contractor Personnel Name
-
Contractor Personnel Signature
-
FPC Work Supervisor
- Andrew Delgado
- Colter Brog
- Kenny Bell
- Noah Abston
- Jesse Johnston
- Travis Alexander
- Mark Abston
- Erik Pitoniak
- Cheovanny Oropeza
- Michael Dildy
-
Area Certified Person
- Jacob Holleman
- Jake Elizondo
- Derrick Forsythe
- Sammy Stanfill
- Mark Abston
- Colter Brog
- Noah Abston
- Kenny Bell
- Travis Alexander
-
Second Certified Personnel
- Mark Abston
- Erik Pitoniak
- John Myers
- Mike Gonzales
- Robert Taylor
- Tyler Smith
-
Permit expiration date and time
General Work Permit (No power source required)
-
General Work Permit (No power source required)
-
Required tools
- Hand tools
- Drill
- Welder
- Grinder
- Powered tools, electric or pneumatic
- Cutting torch
-
One of the selected "Required tools" is not allowed for this type of permit.
-
Will there be an opening of equipment or piping?
-
Has the equipment or piping been isoloated?
-
Stop and review the appropriate P&ID before proceeding.
-
Has the equipment or piping been proven clear of chemicals?
-
A "First Break" watch is required.
-
Name of "First Break" watch?
-
Will the equipment or line require a purge?
-
Has a Lockout/Tagout been completed?
-
Was a lock box issued?
-
Enter lock box number
-
Is a Lockout/Tagout required?
-
Stop and review the appropriate P&ID for lockout/tagout.
-
Is a scaffold/manlift/ladder required?
-
Has an inspection been completed?
-
An inspection must be completed before continuing.
-
Is Special PPE Required
-
Chemical goggles
-
Dust masks
-
Full face respirator
-
Cartridge Type
-
1/2 face respirator
-
Cartridge Type
-
Supplied air respirator required?
-
Is it verified working?
-
Verify to be working prior to work.
-
O2 Bottle / Breather Box verified working?
-
Verify to be working prior to work.
-
Approved Chemical gloves
-
Impact gloves
-
Slicker required for first break only
-
Paper (Tyvek) coveralls
-
Body harness / Tie-off
-
Rubber boots
-
Metatarsal boots
-
Other PPE
-
List other PPE.
-
Appropriate SDS available
-
Stop and locate SDS before continuing.
-
Affected personnel notified
-
Please notify affected personnel before continuing.
-
Is the contaminated area secure?
-
Hot Surfaces Identified and Protected
-
Barricade Tape/Safety cones in place
-
Overhead work, i.e., crane, cherry picker, etc.
-
Is the area barricaded?
-
Is an airhorn available during lift?
Single Signature Permit (Low energy, no cutting or drilling into process equipment)
-
Single Signature Permit (Low energy, no cutting or drilling into process equipment)
-
Required tools
- Hand Tools
- Grinder
- Welder
- Impact
- Drill
- Cutting torch
-
One of the selected "Required tools" is not allowed for this type of permit.
-
Will there be an opening of equipment or piping?
-
Has the equipment or piping been isoloated?
-
Stop and review the appropriate P&ID before proceeding.
-
Has the equipment or piping been proven clear of chemicals?
-
A "First Break" watch is required.
-
Name of "First Break" watch?
-
Will the equipment or line require a purge?
-
Has a Lockout/Tagout been completed?
-
Was a lock box issued?
-
Enter lock box number
-
Is a Lockout/Tagout required?
-
Stop and review the appropriate P&ID for lockout/tagout.
-
Work from scaffolding/manlift/ladder
-
Has an inspection been completed?
-
An inspection must be completed before continuing.
-
Is a fire extinguisher required?
-
Type of fire extinguisher?
- Class A (Fires in ordinary combustible materials, such as wood, cloth, paper, rubber, and many plastics)
- Class B (Fires in flammable liquids, combustible liquids, petroleum greases, tars, oils, oil-based paints, solvents, lacquers, alcohols, and flammable gases)
- Class C (Fires that involve energized electrical equipment)
- Class D (Fires in combustible metals, such as magnesium, titanium, zirconium, sodium, lithium, and potassium)
-
Is Special PPE Required
-
Chemical goggles
-
Splash shield
-
Dust masks
-
Full face respirator
-
Cartridge Type
-
1/2 face respirator
-
Cartridge Type
-
Supplied air respirator required?
-
Is it verified working?
-
Verify to be working prior to work.
-
O2 Bottle / Breather Box verified working?
-
Verify to be working prior to work.
-
Approved Chemical gloves
-
Impact gloves
-
Slicker required for first break only
-
Paper (Tyvek) coveralls
-
Body harness / Tie-off
-
Rubber boots
-
Metatarsal boots
-
Personal monitor
-
List monitor being used.
-
Other PPE
-
List other PPE.
-
Appropriate SDS available
-
Stop and locate SDS before continuing.
-
Affected personnel notified
-
Please notify affected personnel before continuing.
-
GFI Tested
-
Is the contaminated area secure?
-
Hot Surfaces Identified and Protected
-
Barricade Tape/Safety cones in place
-
Overhead work, i.e., crane, cherry picker, etc.
-
Are barricades in place?
-
Is an air horn available during the lift?
-
Atmosphere Test
-
LEL%
-
O2%
-
CO%
-
Area Certified Person
-
Area Certified Person Signature
-
Specify Hazards
-
Atmosphere Test is required for this permit type.
Dual Signature Permit (High energy, drilling or cutting into process equipment)
-
Dual Signature Permit (High energy, drilling or cutting into process equipment)
-
Tools required?
-
Will there be an opening of equipment or piping?
-
Has the equipment or piping been isoloated?
-
Stop and review the appropriate P&ID before proceeding.
-
Has the equipment or piping been proven clear of chemicals?
-
A "First Break" watch is required.
-
Name of "First Break" watch?
-
Will the equipment or line require a purge?
-
Will there be an opening of equipment or pipe?
-
Has the equipment or piping been isolated?
-
Stop and review the appropriate P&ID before proceeding.
-
Will the equipment or piping require a purge?
-
Type of purge?
-
Enter other.
-
Has the equipment or piping been proven clear of chemicals?
-
Watch available for "First Break"
-
Name of "First Break" watch
-
Atmosphere Test
-
LEL%
-
LEL% IS AT A DANGEROUS LEVEL. DO NOT PROCEED.
-
O2%
-
OXYGEN% IS AT AN UNSAFE LEVEL. DO NOT PROCEED.
-
OXYGEN% IS AT AN UNSAFE LEVEL. DO NOT PROCEED.
-
CO%
-
Hazards (Specify)
-
Area Certified Person
- Jacob Holleman
- Jake Elizondo
- Derrick Forsythe
- Sammy Stanfill
- Mark Abston
- Colter Brog
- Noah Abston
- Kenny Bell
- Travis Alexander
-
Second Certified Person
- Mark Abston
- Erik Pitoniak
- John Myers
- Mike Gonzales
- Robert Taylor
- Tyler Smith
-
This type of permit requires an atmosphere test.
-
Work from scaffolding/manlift/ladder
-
Is inspection up-to-date?
-
Is Special PPE Required
-
Chemical goggles
-
Welding hood/cutting goggles
-
Splash shield
-
Impact shield
-
Full face respirator
-
Cartridge Type
-
1/2 face respirator
-
-
Supplied air respirator
-
Verified working?
-
Verify working before work.
-
O2 Bottle/ Breather box verified working?
-
Verify working before work.
-
Chemical gloves
-
Welding gloves (Leather)
-
Impact gloves
-
Slicker required for first break only
-
Paper (Tyvek) coveralls
-
Body harness / Tie-off
-
Rubber boots
-
Metatarsal boots
-
Is a fire extinguisher required?
-
Type of fire extinguisher?
- Class A (Fires in ordinary combustible materials, such as wood, cloth, paper, rubber, and many plastics)
- Class B (Fires in flammable liquids, combustible liquids, petroleum greases, tars, oils, oil-based paints, solvents, lacquers, alcohols, and flammable gases)
- Class C (Fires that involve energized electrical equipment)
- Class D (Fires in combustible metals, such as magnesium, titanium, zirconium, sodium, lithium, and potassium)
-
Personnel Monitor Required?
-
List required monitor
-
Other PPE required
-
List other PPE
-
Barricade Tape/Safety cones in place
-
Hot Surfaces Identified and Protected
-
Contaminated areas identified & protected
-
GFI Tested
Confined Space Entry (Dual Signature Permit)
-
Confined Space Entry (Is large enough and so configured that an employee can bodily enter and perform assigned work;<br>Has limited or restricted means for entry or exit (for example, tanks, vessels, silos, storage bins, hoppers, vaults, and pits are spaces that may have limited means of entry); and<br>Is not designed for continuous employee occupancy)
-
Will there be an opening of equipment or piping?
-
Has the equipment or piping been isoloated?
-
Stop and review the appropriate P&ID before proceeding.
-
Has the equipment or piping been proven clear of chemicals?
-
A "First Break" watch is required.
-
Name of "First Break" watch?
-
Will the equipment or line require a purge?
-
Will there be an opening of equipment or pipe?
-
Has the equipment or piping been isolated?
-
Stop and review the appropriate P&ID before proceeding.
-
Will the equipment or piping require a purge?
-
Type of purge?
-
Enter other.
-
Has the equipment or piping been proven clear of chemicals?
-
Watch available for "First Break"
-
Name of "First Break" watch
-
Atmosphere Test
-
LEL%
-
LEL% IS AT A DANGEROUS LEVEL. DO NOT PROCEED.
-
O2%
-
OXYGEN% IS AT AN UNSAFE LEVEL. DO NOT PROCEED.
-
OXYGEN% IS AT AN UNSAFE LEVEL. DO NOT PROCEED.
-
CO%
-
Hazards (Specify)
-
Area Certified Person
- Jacob Holleman
- Jake Elizondo
- Derrick Forsythe
- Sammy Stanfill
- Mark Abston
- Colter Brog
- Noah Abston
- Kenny Bell
- Travis Alexander
-
Second Certified Person
- Mark Abston
- Erik Pitoniak
- John Myers
- Mike Gonzales
- Robert Taylor
- Tyler Smith
-
This type of permit requires an atmosphere test.
-
Work from scaffolding/manlift/ladder
-
Is inspection up-to-date?
-
Is Special PPE Required
-
Chemical goggles
-
Welding hood/cutting goggles
-
Splash shield
-
Impact shield
-
Full face respirator
-
Cartridge Type
-
1/2 face respirator
-
-
Supplied air respirator
-
Verified working?
-
Verify working before work.
-
O2 Bottle/ Breather box verified working?
-
Verify working before work.
-
Chemical gloves
-
Welding gloves (Leather)
-
Impact gloves
-
Slicker required for first break only
-
Paper (Tyvek) coveralls
-
Body harness / Tie-off
-
Rubber boots
-
Metatarsal boots
-
Is a fire extinguisher required?
-
Type of fire extinguisher?
- Class A (Fires in ordinary combustible materials, such as wood, cloth, paper, rubber, and many plastics)
- Class B (Fires in flammable liquids, combustible liquids, petroleum greases, tars, oils, oil-based paints, solvents, lacquers, alcohols, and flammable gases)
- Class C (Fires that involve energized electrical equipment)
- Class D (Fires in combustible metals, such as magnesium, titanium, zirconium, sodium, lithium, and potassium)
-
Personnel Monitor Required?
-
List required monitor
-
Other PPE required
-
List other PPE
-
Barricade Tape/Safety cones in place
-
Is there an emergency plan?
-
An emergency plan is required before proceeding.
-
Hot Surfaces Identified and Protected
-
Contaminated areas identified & protected
-
GFI Tested
Excavation (Dual Signature Permit)
-
Confined Space/Excavation Entry
-
Tank/Vessel entry
-
Equipment isolated
-
Rescue kit available
-
Bottle watch
-
Name of bottle watch
-
Air horn available
-
Hole watch
-
Name of hole watch
-
Radio available
-
Rescue plan
-
Explain evacuation plan.
-
Excavation shored/sloped/trench box
-
Space ventilated
-
Attendant present
-
Atmosphere Test
-
LEL%
-
LEL% IS AT A DANGEROUS LEVEL. DO NOT PROCEED.
-
O2%
-
O2% IS AT AN UNSAFE LEVEL. DO NOT PROCEED.
-
02% IS AT AN UNSAFE LEVEL. DO NOT PROCEED.
-
CO%
-
Hazardous (Specify)
-
Area Certified Person Name
- Jacob Holleman
- Jake Elizondo
- Derrick Forsythe
- Sammy Stanfill
- Mark Abston
- Colter Brog
- Noah Abston
- Kenny Bell
- Travis Alexander
-
Second Certified Person Name
- Mark Abston
- Erik Pitoniak
- John Myers
- Mike Gonzales
- Robert Taylor
- Tyler Smith
-
Second Certified Person Signature
-
Job Hazard Concerns
-
Explain
Job Completion / Permit Sign-Off
-
Job completed, area cleaned and inspected
-
Explain the failure.
-
Worker, Contractor, or Crew Representative Name
-
Worker, Contractor, or Crew Representative Signature
-
Area Certified Person Name
- Jacob Holleman
- Jake Elizondo
- Derrick Forsythe
- Sammy Stanfill
- Mark Abston
- Colter Brog
- Noah Abston
- Kenny Bell
- Travis Alexander
-
Area Certified Person Signature