Title Page

  • Conducted on

  • Prepared by

  • Location

Process

  • Have you completed a SWMS form?

  • Roof type

  • Is there rubbers under the feet and base?

  • Are the tiles around the base in good condition?

  • Look for replacement tiles or contact roofers or supervisor

  • Is the base-pole level in both directions?

  • Loosen the outriggers and level the base-pole

  • Is the dish facing roughly north (356.37 Degrees is suggested)

  • Loosen clamp at the back of the dish on the base-pole and slide the dish to face North

  • Is the pitch of the arm of the dish at 50 degrees?

  • Loosen the bolt on the base-pole that controls the pitch and adjust to 50 degrees. Use your phone to double check the angle angle.

  • Is the tuner showing expected results?

  • Check that the dish i securely placed and double check the previous angles. Move dish around slightly and refer to tuner to troubleshoot connection.

  • Are all cables re-connected to the dish in a neat and tidy manner?

  • Photo of dish reconnected

  • Tidy the cables up

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.