iAuditor Mobile App Preview

Audit

HARNESS IDENTIFICATION

Harness Manufacturer

Harness Model

Harness Lot Number

Harness Serial Number

Date of Manufacture

In-Service Date

Harness CSA Class: A - Fall Arrest

Harness CSA Class: D - Suspension and Controlled Descent

Harness CSA Class: E - Limited Access

Harness CSA Class: L - Ladder Climbing

Harness CSA Class: P - Work Positioning

HARDWARE

D-rings
Check D-rings for rust or corrosion, distortion, cracks, breaks, and rough or sharp edges. D-rings should pivot freely.

Buckles
note any unusual wear, damage or distortion. On tongue buckles check that the roller and tongue move freely and that the tongue overlaps the buckle frame. Check the outer and center bars on friction and mating buckles for distortion. On quick release types check for broken plastic and that they will not release when one release is opened. Mating buckles should nest together.

WEBBING

Webbing
Inspect the entire length of all the webbing looking for frayed edges, broken fibers, pulled stitches, cuts, burns and chemical damage. Also look for mildew, discoloration, hard shiny spots, any webbing that has been marked with a felt pen, excessive hardness or brittleness or the Harness Fall Indicator deployment.

Stitching
Check all stitching for ripped or pulled stitches and to make sure the webbing joints are not loose. Also look for missing stitching, hard or shiny spots, or discoloration of stitching.

LABELS

Inspect to be certain that all harnesses have a label that is legible and securely held in place.

OVERALL DISPOSITION

Harness is approved for use at time of inspection.

Harness is NOT approved for further use and must be removed from service.

Full Body Harness Inspection Checklist

Created by: SafetyCulture Staff | Industry: Agriculture | Downloads: 181

Featured Template: Full Body Harness Inspection Checklist. Use this checklist to complete regular inspections of full body harness equipment. Template can be used for annual harness inspections, as well as regular inspections to ensure equipment is safe for use.

Signup for a free iAuditor account to download and edit this checklist. It will be added to your free account and you will be able to conduct inspections from your mobile device.

Download and edit this free checklist

Browse for other checklists


iauditor logo

The World's #1 Cloud-Based Inspection Software and App

chevron logo
coles logo
emirates logo
overground logo
tesla logo
toyota logo

Audit

HARNESS IDENTIFICATION

Harness Manufacturer

Harness Model

Harness Lot Number

Harness Serial Number

Date of Manufacture

In-Service Date

Harness CSA Class: A - Fall Arrest

Harness CSA Class: D - Suspension and Controlled Descent

Harness CSA Class: E - Limited Access

Harness CSA Class: L - Ladder Climbing

Harness CSA Class: P - Work Positioning

HARDWARE

D-rings
Check D-rings for rust or corrosion, distortion, cracks, breaks, and rough or sharp edges. D-rings should pivot freely.

Buckles
note any unusual wear, damage or distortion. On tongue buckles check that the roller and tongue move freely and that the tongue overlaps the buckle frame. Check the outer and center bars on friction and mating buckles for distortion. On quick release types check for broken plastic and that they will not release when one release is opened. Mating buckles should nest together.

WEBBING

Webbing
Inspect the entire length of all the webbing looking for frayed edges, broken fibers, pulled stitches, cuts, burns and chemical damage. Also look for mildew, discoloration, hard shiny spots, any webbing that has been marked with a felt pen, excessive hardness or brittleness or the Harness Fall Indicator deployment.

Stitching
Check all stitching for ripped or pulled stitches and to make sure the webbing joints are not loose. Also look for missing stitching, hard or shiny spots, or discoloration of stitching.

LABELS

Inspect to be certain that all harnesses have a label that is legible and securely held in place.

OVERALL DISPOSITION

Harness is approved for use at time of inspection.

Harness is NOT approved for further use and must be removed from service.