Gas Safe card and ACS elements correct for work to be carried out.
Reference material / Technical bulletins available.
Visual / written risk assessment completed and recorded.
Hot work permit obtained.
Fire extinguisher available.
Customer care / work area preparation completed
Existing gas installation inspected for suitability.
ECV correctly positioned labelled and operable
Point of entry Main equipotential bonding installed
Gas pipework correctly identified, Gas line diagram available were required
Gas pipework size support & route is correct
Gas pipework is constructed of approved materials.
Gas pipework sleeved & sleeves sealed
AECV / s correctly positioned labeled & operable
Ducts and voids ventilated correctly
Initial tightness test completed correctly
Appliance Installed to manufacturers instructions
Flue / Ductwork installed correctly
Base / proprietary surrounds suitable for installation.
Ventilation is suitable for requirements.
Workmanship / visual appearance suitable
Electrical tests identified & completed correctly
Electrical isolation check completed correctly
Fuse rating checked and appropriate
Final tightness test completed correctly
Purging completed correctly
All disturbed joints tested
Commissioned to manufacturers instructions
Flue size construction route termination and support visually examined and correct
Flue flow continuity check completed correctly
Spillage / Case seal tests completed correctly
Ventilation size and route checked and correct
Operating pressure and / or gas rate checked
Safety devices operation checked
Combustion analysis completed
Appliance / associated controls operating correctly
Safe working practices employed
Electrical equipment safety and calibration checks carried out.
Customer instructed in use and instructions left / controls reset
Documentation completed correctly