Rob Frost

Gietz Planned Maintenance Checklist

Use this Template

Print as PDF

Use this Template

Go digital today!

Convert your paper checklists into digital forms

Scan this QR code to use this paper checklist on your smartphone or tablet or visit https://safetyculture.com/

Gietz Planned Maintenance Checklist

Site conducted
Site conducted
Conducted on
Prepared by

Check Operation Of Stop Buttons & Guards
Clean the photocells and reflecting mirrors, these are: 1. Feeder stack height control. 2. Front lay control. 3. Out of press control. 4. Delivery stack height control. 5. Sheet over shoot control
Lightly lubricate side lay, side lay levers and cams
Lubricate gripper bar interlock, both sides
Clean and lightly oil gripper bar mounting points & opening pins
Spray the main gripper chains with chain oil
Rotate the oil filter lever 3 times
Clean the filters on the vacuum compressor & cooling ducts
Clean the filters on the electrical cabinet
Ensure Machine & Area Clean & Tidy

Rob Frost

Gietz Planned Maintenance Checklist

Use this Template

Print as PDF

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.