Guillotine Safety Checks (Croydon)

• Machine

• Serial Number

• Conducted on

  Date

• Undertaken by

• Location

Cut Buttons

• Guillotine should only strike on when both cut buttons are depressed within 0.5 sec of each other.

  Checked

  Issue

• Guillotine should not strike on when each control is operated independently and reset in turn.

  Checked

  Issue

• Guillotine should not strike on when one cut button is operated followed by the other after 2-3 seconds delay.

  Checked

  Issue

• Guillotine should not strike on when cut buttons are operated within 0.5 sec but if one is released mid-way through the stroke and re-operated.

  Checked

  Issue

Light Barrier

• Is the guard indicator operating correctly (where fitted)?

  Checked

  Issue

• Is the recommended test piece detected (3 places)?

  Checked

  Issue

• Does the knife and clamp stop when the light barrier is interrupted during stroke.

  Checked

  Issue

• Is the fixed rear table guarding fitted and secured or does the interlocked access gate prevent powered knife and clamp movement?

  Checked

  Issue