Information
Fork Lift Pre-Use Inspection
-
FLT No.
-
Conducted on
-
Conducted by:
-
Meter Start
Daily Checklist
-
Is the Fork Lift's appearance in good condition and clean?
-
Is the manufacturer's capacity plate clean and readable?
-
Check lift chains for equal tension, broken pins and extra wear.
-
Check forks for damage.
-
Check for loose bolts and cracks on overhead guard, back rest and tilt cylinders.
-
Are hydraulic hoses in good condition?
-
Check tires for cracks or other signs of wear. If inflatable tires, does air pressure meet the manufacturers specification?
-
Do the lights and horn work?
-
Check that the parking brake is working properly.
-
Check that the seat is in good condition and the seat belt is working properly.
-
Any signs of oil, coolant or fuel leaks under the fork lift?
-
Check the fluid levels for brake fluid, engine oil, hydraulic tank and coolant.
-
Start the engine and check the dashboard gauges for proper readings.
-
Make sure there is no excessive play in the steering wheel.
-
Do the mast and fork raise, lower and tilt smoothly?
-
Check that the clutch engages properly. Does it shift properly?
-
Hold the brake pedal down for 10 seconds. Is there any noticeable drift with the pressure?
-
Is the battery in good condition and charged? Are the connections tight? Is there sufficient charge when you turn the key?
-
Pre-Use Inspector's Signature
