Title Page
-
Employee Name
-
Trained by
-
Select date
-
Hilti DX-460
-
This tool should NEVER be used without a manufacturer certification card/ training.
-
Employee has received training and card
-
Safety glasses should ALWAYS be worn while using this tool.
-
Use of appropriate PPE
-
Tool should always be held 90 degrees to work surface
-
90 degree to work
-
Adjust power setting based on material and load
-
Power adjustment
-
Verify the correct color load is used for material and fastner.
-
Color identification
-
Set fastner in nose and depress against work surface.
-
Fastner placement/ installation
-
Fully automatic tool, if load does not fire advance cartridge and fire again after waiting 10 seconds.
-
Automatic feature
-
Arms should be slightly bent, not straight.
-
Arm position/ handling
-
Tool must NEVER be left unattended
-
Put away in box when not in use
-
Tool should NEVER be loaded when not in use.
-
Empty cartridges when complete
-
Empty cartridges should be picked up and placed in a safe container.
-
Clean up empty cartridges
-
Use two hands on the nail gunver.Never point at your self or another person.
-
Tool handling
-
Tool can be disassembled for cleaning and wear inspection.
-
Disassembly/ reassembly competence
-
Take a picture of manufacturer certification card.
-
Take a picture with hard hat sticker
-
Employee signature
-
Trainer signature
-
Training information provided in Spanish translation. Initial
