3.1 - Extinguishers fully charged and mounted in proper locations?
3.2 - Extinguishers current on monthly and annual inspections?
3.3 - Extinguishers mounted at proper height and not obstructed? (Max height 47.25" & minimum base height of 4")
3.4 - Extinguisher signs placed above all extinguishers?
3.6 - Exits are clear of obstructions and marked with "EXIT" signs?
3.8 - Exit doors are unlocked when building is occupied?
4.1 - Floor surfaces are even and uncluttered?
4.2 - Entry and walkways are kept unblocked / clear?
4.3 - Stairs and risers are kept clear & in safe condition?
4.4 - Handrails are in good condition & installed where required?
4.5 - No trip or slip hazards and non-slip floor coverings in good condition?
5.1 - Clear of rubbish / clutter?
5.2 - Floors free of oils spills or other slip hazards?
5.3 - Tools not in use kept in place?
5.4 - No damaged hand or power tools in use and all tool have proper guards?
5.5 - Proper PPE and emergency equipment available for work to be performed (eye wash, eye protection, hearing protection, welding protection, hand protection, etc.)
6.1 - Oily rags and combustible refuse placed in covered metal containers?
6.2 - Fuels stored in OSHA approved containers?
6.3 - Flammables not stored in entries, exits, stairs, or other egress routes?
6.4 - Flammables not stored in amounts over 25 gals. unless in a Flammables cabinet? (60 gallons max of flammable fuels in a Flammables cabinet)
6.5 - Aerosols are stored in cabinets when not in use? (fire cabinets are required when total flammables in shop exceed 25 gallons)
6.6 - All Flammables including aerosols kept away from spark or flame producing tools?
6.7 - Oxygen cylinders are stored greater that 20 feet from acetylene or other fuel gas cylinders or combustibles unless in a rack attached to welding of cutting tools?
6.8 - All stored cylinders are capped and secured to prevent falling or damage?
8.1 - Storage racks are secured and in good condition?
8.2 - Warehouse areas are organized and free of clutter?
8.3 - Overhead storage areas marked with max load ratings?
8.4 - Storage racks and storage areas are not unsafely loaded or stacked?
8.5 - Chemical containers are free of leaks and stored in approved areas?
9.1 - Machines are properly guarded? (Including pulleys, chain and sprockets, rotating shafts, PTO shafts, drags, etc.)
9.2 - All equipment is in safe operating condition?
10.1 - Wiring and conduits are free of damage?
10.2 - Electric panels are secured shut?
10.3 - Box covers are in place and no open holes in electrical boxes?
10.4 - Electrical panels are not blocked & no combustibles stored within 3 feet?
10.5 - No broken plugs, sockets or switches?
10.6 - Power cords and leads in safe condition? (No cuts, twists, burns, exposed wires, or missing ground prongs, or other defects?)
10.7 - No extension cords run for permanent applications?
10.8 - No power cords run through door ways, walls, windows, walkways, or fastened to walls or fixtures?
10.9 - All electrical breakers are properly marked?
10.10 - GFCI protection for electrical devices used in potentially wet areas?
11.1 - Workers trained on haz-com policy? (reading msds, reading labels, how to obtain msds)
11.2 - Workers trained initially and then annually on the categories of hazardous materials the come into contact with?
11.3 - List of hazardous substances complete and available?
11.4 - Material Safety Data Sheets are readily available?
11.5 - All chemical containers are properly labeled?
11.8 - Proper signage for hazmat storage areas? (NFPA placards, NO SMOKING, Emergency contact numbers, PPE signs, and Authorized Persons Only).
12.1 - Are all ladders Industrial strength? (Non Household rated, check label.)
12.2 - Are ladders in good condition?
12.3 - Used according to instructions?
12.4 - For extension ladders are ropes, pulleys and treads in a good state of repair?
12.5 - No objects such as pallets, buckets, chairs, or homemade ladders are used as portable ladders or scaffolds?
13.1 - OSHA compliant railings where required? (Standard railing required at 4 feet)
13.2 - Gates or chains at open edges?
13.3 - Toe kicks where required?
13.4 - Workers do not access unguarded areas without fall protection?
12.6 - Fixed ladders safe & compliant with OSHA standards?
12.7 - Catwalks and platforms in safe condition?
12.1 - Unblocked access to emergency equipment such as eye wash and first aid?
12.2 - At least monthly inspections of all first aid and emergency equipment?
12.3 - Are first aid cabinets and contents clean and orderly?
12.4 - No first aid contents past their expiry date?
12.5 - Signs & labels for First aid Cabinets, AEDs, emergency showers, and eye wash stations?
12.6 - Employees aware of location of first aid and emergency equipment?
12.7 - Any on site employees trained to perform basic first aid and CPR?
12.8 - Are emergency numbers displayed?
14.1 - All operators are current on forklift certifications?
14.2 - Forklift lifting capacity plates legible?
14.3 - Daily inspections documented?
14.4 - Seatbelt used when operated?
14.6 - No unauthorized attachments or alterations? (such as a towing ball on forks or hole cut in forks.)
14.5 - Forklifts are in safe operating condition?
14.7 - Proper lifting basket is available and used if elevating workers?
14.8 - Hazards in forklift traffic areas such as curbs are clearly marked?
15.1 - Proper equipment on site?
15.2 - Employees trained to use equipment and training documented?
15.3 - Equipment inspected and documented?
15.4 - No unsafe equipment in use?
17.1 - All other safety or compliance concerns are adequately addressed at location?
18.1 - Holds location safety meeting at least monthly?
18.2 - Representative attends each company safety committee meeting?
18.4 - No lost time injuries since January 1?
18.8 - Location managers ensures safety and compliance by all employees?