Title Page
-
Unit number
-
Inspection Date & Time
-
Conducted by
-
Does Hot tub require testing?
-
Check safety of AREA/TUB/GENERAL CONDITION
-
Temperature
-
Set temperature to 36 degrees.
-
What corrective action has been applied ?
-
Cholrine / Bromine ?
-
Chlorine FREE (DPD1) Value should be between 3.0 (min) and 5.0 (max)
-
What corrective action has been applied ?
-
Chlorine TOTAL (DPD3) - Record Value
-
What is Chlorine COMBINED Value
-
What corrective action has been applied ?
-
Bromine Level (DPD1) Level should be between 3.0 (min) and 5.0 (max)
-
What corrective action has taken place?
-
pH - Value should be between 7.2 & 7.8
-
What corrective action has been applied ?
-
Foam Away introduced ?
-
Water top up required ?
-
Any other Corrective Actions performed or required ?
-
-
-
Reason not require testing
-
Describe "other". (Create "action" if needed repair)
-
Is the system shocked to >10ppm? Bring to over 10ppm.
-
Run system for 10 minutes with all jets before emptying water from tub
-
Water changed?
-
Has tub been drained, scrubbed, hosed down and vac?
-
Is Patio/Decking area clean, swept and free of weeds?
-
Clear area of weeds, sweep & clean decking - (Create additional action if required)
-
Is Cover in good condition, cleaned/wiped down ?
-
Is decking, ballustrades, ropes, posts, steps, etc. all in good order ?
-
Reset table and chairs. Check once completed
Notes & Sign off
-
Any further remedial actions performed or required ?
-
I confirm data entries are True & Correct and Supervisor has been made aware of any issues that may affect the safe operation of the Pool
